Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] phy: qualcomm: usb-hs-28nm: Prepare clocks in init
Date: Tue,  7 Apr 2020 18:28:54 -0700	[thread overview]
Message-ID: <20200408012854.3070187-1-bjorn.andersson@linaro.org> (raw)

The AHB clock must be on for qcom_snps_hsphy_init() to be able to write
the initialization sequence to the hardware, so move the clock
enablement to phy init and exit.

Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 32 ++++++++++++++-------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index d998e65c89c8..a52a9bf13b75 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -160,18 +160,11 @@ static int qcom_snps_hsphy_power_on(struct phy *phy)
 	ret = regulator_bulk_enable(VREG_NUM, priv->vregs);
 	if (ret)
 		return ret;
-	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
-	if (ret)
-		goto err_disable_regulator;
+
 	qcom_snps_hsphy_disable_hv_interrupts(priv);
 	qcom_snps_hsphy_exit_retention(priv);
 
 	return 0;
-
-err_disable_regulator:
-	regulator_bulk_disable(VREG_NUM, priv->vregs);
-
-	return ret;
 }
 
 static int qcom_snps_hsphy_power_off(struct phy *phy)
@@ -180,7 +173,6 @@ static int qcom_snps_hsphy_power_off(struct phy *phy)
 
 	qcom_snps_hsphy_enter_retention(priv);
 	qcom_snps_hsphy_enable_hv_interrupts(priv);
-	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
 	regulator_bulk_disable(VREG_NUM, priv->vregs);
 
 	return 0;
@@ -266,21 +258,39 @@ static int qcom_snps_hsphy_init(struct phy *phy)
 	struct hsphy_priv *priv = phy_get_drvdata(phy);
 	int ret;
 
-	ret = qcom_snps_hsphy_reset(priv);
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
 	if (ret)
 		return ret;
 
+	ret = qcom_snps_hsphy_reset(priv);
+	if (ret)
+		goto disable_clocks;
+
 	qcom_snps_hsphy_init_sequence(priv);
 
 	ret = qcom_snps_hsphy_por_reset(priv);
 	if (ret)
-		return ret;
+		goto disable_clocks;
+
+	return 0;
+
+disable_clocks:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	return ret;
+}
+
+static int qcom_snps_hsphy_exit(struct phy *phy)
+{
+	struct hsphy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
 
 	return 0;
 }
 
 static const struct phy_ops qcom_snps_hsphy_ops = {
 	.init = qcom_snps_hsphy_init,
+	.exit = qcom_snps_hsphy_exit,
 	.power_on = qcom_snps_hsphy_power_on,
 	.power_off = qcom_snps_hsphy_power_off,
 	.set_mode = qcom_snps_hsphy_set_mode,
-- 
2.24.0


             reply	other threads:[~2020-04-08  1:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-08  1:28 Bjorn Andersson [this message]
2020-04-08  9:34 ` [PATCH] phy: qualcomm: usb-hs-28nm: Prepare clocks in init Bryan O'Donoghue
2020-04-23  3:13 ` Bjorn Andersson
2020-04-28  4:55 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200408012854.3070187-1-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shawn.guo@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox