From: Jordan Crouse <jcrouse@codeaurora.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: freedreno@lists.freedesktop.org, Rob Clark <robdclark@gmail.com>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
Sharat Masetty <smasetty@codeaurora.org>,
Akhil P Oommen <akhilpo@codeaurora.org>,
"open list:DRM DRIVER FOR MSM ADRENO GPU"
<linux-arm-msm@vger.kernel.org>,
"open list:DRM DRIVER FOR MSM ADRENO GPU"
<dri-devel@lists.freedesktop.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 9/9] drm/msm/a6xx: update a6xx_hw_init for A640 and A650
Date: Mon, 18 May 2020 08:47:03 -0600 [thread overview]
Message-ID: <20200518144703.GF3915@jcrouse1-lnx.qualcomm.com> (raw)
In-Reply-To: <20200423210946.28867-10-jonathan@marek.ca>
On Thu, Apr 23, 2020 at 05:09:21PM -0400, Jonathan Marek wrote:
> Adreno 640 and 650 GPUs need some registers set differently.
As before, make sure you send the XML updates up so the database stays current.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> drivers/gpu/drm/msm/adreno/a6xx.xml.h | 14 +++++++
> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 56 ++++++++++++++++++++++-----
> 2 files changed, 61 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx.xml.h b/drivers/gpu/drm/msm/adreno/a6xx.xml.h
> index ed78fee2a262..47840b73cdda 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx.xml.h
> +++ b/drivers/gpu/drm/msm/adreno/a6xx.xml.h
> @@ -1047,6 +1047,8 @@ enum a6xx_tex_type {
>
> #define REG_A6XX_CP_MISC_CNTL 0x00000840
>
> +#define REG_A6XX_CP_APRIV_CNTL 0x00000844
> +
> #define REG_A6XX_CP_ROQ_THRESHOLDS_1 0x000008c1
>
> #define REG_A6XX_CP_ROQ_THRESHOLDS_2 0x000008c2
> @@ -1764,6 +1766,8 @@ static inline uint32_t A6XX_CP_PROTECT_REG_MASK_LEN(uint32_t val)
>
> #define REG_A6XX_RBBM_VBIF_CLIENT_QOS_CNTL 0x00000010
>
> +#define REG_A6XX_RBBM_GBIF_CLIENT_QOS_CNTL 0x00000011
> +
> #define REG_A6XX_RBBM_INTERFACE_HANG_INT_CNTL 0x0000001f
>
> #define REG_A6XX_RBBM_INT_CLEAR_CMD 0x00000037
> @@ -2418,6 +2422,16 @@ static inline uint32_t A6XX_UCHE_CLIENT_PF_PERFSEL(uint32_t val)
>
> #define REG_A6XX_TPL1_NC_MODE_CNTL 0x0000b604
>
> +#define REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_0 0x0000b608
> +
> +#define REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_1 0x0000b609
> +
> +#define REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_2 0x0000b60a
> +
> +#define REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_3 0x0000b60b
> +
> +#define REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_4 0x0000b60c
> +
> #define REG_A6XX_TPL1_PERFCTR_TP_SEL_0 0x0000b610
>
> #define REG_A6XX_TPL1_PERFCTR_TP_SEL_1 0x0000b611
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index a860d4970e10..e1eb34fa3a99 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -414,7 +414,17 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> a6xx_set_hwcg(gpu, true);
>
> /* VBIF/GBIF start*/
> - gpu_write(gpu, REG_A6XX_RBBM_VBIF_CLIENT_QOS_CNTL, 0x3);
> + if (adreno_is_a640(adreno_gpu) || adreno_is_a650(adreno_gpu)) {
> + gpu_write(gpu, REG_A6XX_GBIF_QSB_SIDE0, 0x00071620);
> + gpu_write(gpu, REG_A6XX_GBIF_QSB_SIDE1, 0x00071620);
> + gpu_write(gpu, REG_A6XX_GBIF_QSB_SIDE2, 0x00071620);
> + gpu_write(gpu, REG_A6XX_GBIF_QSB_SIDE3, 0x00071620);
> + gpu_write(gpu, REG_A6XX_GBIF_QSB_SIDE3, 0x00071620);
> + gpu_write(gpu, REG_A6XX_RBBM_GBIF_CLIENT_QOS_CNTL, 0x3);
> + } else {
> + gpu_write(gpu, REG_A6XX_RBBM_VBIF_CLIENT_QOS_CNTL, 0x3);
> + }
> +
> if (adreno_is_a630(adreno_gpu))
> gpu_write(gpu, REG_A6XX_VBIF_GATE_OFF_WRREQ_EN, 0x00000009);
>
> @@ -429,25 +439,35 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> gpu_write(gpu, REG_A6XX_UCHE_WRITE_THRU_BASE_LO, 0xfffff000);
> gpu_write(gpu, REG_A6XX_UCHE_WRITE_THRU_BASE_HI, 0x0001ffff);
>
> - /* Set the GMEM VA range [0x100000:0x100000 + gpu->gmem - 1] */
> - gpu_write64(gpu, REG_A6XX_UCHE_GMEM_RANGE_MIN_LO,
> - REG_A6XX_UCHE_GMEM_RANGE_MIN_HI, 0x00100000);
> + if (!adreno_is_a650(adreno_gpu)) {
> + /* Set the GMEM VA range [0x100000:0x100000 + gpu->gmem - 1] */
> + gpu_write64(gpu, REG_A6XX_UCHE_GMEM_RANGE_MIN_LO,
> + REG_A6XX_UCHE_GMEM_RANGE_MIN_HI, 0x00100000);
>
> - gpu_write64(gpu, REG_A6XX_UCHE_GMEM_RANGE_MAX_LO,
> - REG_A6XX_UCHE_GMEM_RANGE_MAX_HI,
> - 0x00100000 + adreno_gpu->gmem - 1);
> + gpu_write64(gpu, REG_A6XX_UCHE_GMEM_RANGE_MAX_LO,
> + REG_A6XX_UCHE_GMEM_RANGE_MAX_HI,
> + 0x00100000 + adreno_gpu->gmem - 1);
> + }
>
> gpu_write(gpu, REG_A6XX_UCHE_FILTER_CNTL, 0x804);
> gpu_write(gpu, REG_A6XX_UCHE_CACHE_WAYS, 0x4);
>
> - gpu_write(gpu, REG_A6XX_CP_ROQ_THRESHOLDS_2, 0x010000c0);
> + if (adreno_is_a640(adreno_gpu) || adreno_is_a650(adreno_gpu))
> + gpu_write(gpu, REG_A6XX_CP_ROQ_THRESHOLDS_2, 0x02000140);
> + else
> + gpu_write(gpu, REG_A6XX_CP_ROQ_THRESHOLDS_2, 0x010000c0);
> gpu_write(gpu, REG_A6XX_CP_ROQ_THRESHOLDS_1, 0x8040362c);
>
> /* Setting the mem pool size */
> gpu_write(gpu, REG_A6XX_CP_MEM_POOL_SIZE, 128);
>
> /* Setting the primFifo thresholds default values */
> - gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, (0x300 << 11));
> + if (adreno_is_a650(adreno_gpu))
> + gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, 0x00300000);
> + else if (adreno_is_a640(adreno_gpu))
> + gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, 0x00200000);
> + else
> + gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, (0x300 << 11));
>
> /* Set the AHB default slave response to "ERROR" */
> gpu_write(gpu, REG_A6XX_CP_AHB_CNTL, 0x1);
> @@ -471,6 +491,19 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
>
> gpu_write(gpu, REG_A6XX_UCHE_CLIENT_PF, 1);
>
> + /* Set weights for bicubic filtering */
> + if (adreno_is_a650(adreno_gpu)) {
> + gpu_write(gpu, REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_0, 0);
> + gpu_write(gpu, REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_1,
> + 0x3fe05ff4);
> + gpu_write(gpu, REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_2,
> + 0x3fa0ebee);
> + gpu_write(gpu, REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_3,
> + 0x3f5193ed);
> + gpu_write(gpu, REG_A6XX_TPL1_BICUBIC_WEIGHTS_TABLE_4,
> + 0x3f0243f0);
> + }
> +
> /* Protect registers from the CP */
> gpu_write(gpu, REG_A6XX_CP_PROTECT_CNTL, 0x00000003);
>
> @@ -508,6 +541,11 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
> A6XX_PROTECT_RDONLY(0x980, 0x4));
> gpu_write(gpu, REG_A6XX_CP_PROTECT(25), A6XX_PROTECT_RW(0xa630, 0x0));
>
> + if (adreno_is_a650(adreno_gpu)) {
> + gpu_write(gpu, REG_A6XX_CP_APRIV_CNTL,
> + (1 << 6) | (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1));
> + }
> +
> /* Enable interrupts */
> gpu_write(gpu, REG_A6XX_RBBM_INT_0_MASK, A6XX_INT_MASK);
>
> --
> 2.26.1
>
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
prev parent reply other threads:[~2020-05-18 14:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 21:09 [PATCH v3 0/9] Add support for A640 and A650 Jonathan Marek
2020-04-23 21:09 ` [PATCH v3 1/9] drm/msm: add msm_gem_get_and_pin_iova_range Jonathan Marek
2020-05-18 14:42 ` [Freedreno] " Jordan Crouse
2020-04-23 21:09 ` [PATCH v3 2/9] drm/msm: add internal MSM_BO_MAP_PRIV flag Jonathan Marek
2020-04-23 21:09 ` [PATCH v3 3/9] drm/msm/a6xx: use msm_gem for GMU memory objects Jonathan Marek
2020-04-23 21:09 ` [PATCH v3 4/9] drm/msm/a6xx: add A640/A650 to gpulist Jonathan Marek
2020-04-23 21:09 ` [PATCH v3 5/9] drm/msm/a6xx: HFI v2 for A640 and A650 Jonathan Marek
2020-04-23 21:09 ` [PATCH v3 6/9] drm/msm/a6xx: A640/A650 GMU firmware path Jonathan Marek
2020-05-18 14:44 ` Jordan Crouse
2020-04-23 21:09 ` [PATCH v3 7/9] drm/msm/a6xx: update pdc/rscc GMU registers for A640/A650 Jonathan Marek
2020-05-18 14:46 ` Jordan Crouse
2020-04-23 21:09 ` [PATCH v3 8/9] drm/msm/a6xx: enable GMU log Jonathan Marek
2020-04-23 21:09 ` [PATCH v3 9/9] drm/msm/a6xx: update a6xx_hw_init for A640 and A650 Jonathan Marek
2020-05-18 14:47 ` Jordan Crouse [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200518144703.GF3915@jcrouse1-lnx.qualcomm.com \
--to=jcrouse@codeaurora.org \
--cc=airlied@linux.ie \
--cc=akhilpo@codeaurora.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=smasetty@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox