Re: [PATCH v4 2/6] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding

Rob Herring
2020-06-29T22:07:43Z

On Fri, 26 Jun 2020 11:55:12 -0700, Wesley Cheng wrote:
> Introduce the dt-binding for enabling USB type C orientation and role
> detection using the PM8150B. The driver will be responsible for receiving
> the interrupt at a state change on the CC lines, reading the orientation/role,
> and communicating this information to the remote clients, which can include
> a role switch node and a type C switch.
>
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
> .../bindings/usb/qcom,pmic-typec.yaml | 126 ++++++++++++++++++
> 1 file changed, 126 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
>

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:40.54-42.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:43.51-45.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@1: node has a unit name, but no reg or ranges property

See https://patchwork.ozlabs.org/patch/1317984

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.