[PATCH 2/7] ARM: dts: qcom: msm8974-klte: Add support for touchkey

[Iskren Chernev <iskren.chernev@gmail.com>]

Add support for the touchkey found on the Samsung Galaxy S5. The
touchkey is responsible for handling the application and back buttons
found around the home button.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../boot/dts/qcom-msm8974-samsung-klte.dts    | 44 ++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 9520c6e7910ce..750e2f261139a 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -145,7 +145,7 @@ pma8084_l18: l18 {
 					};
 
 					pma8084_l19: l19 {
-						regulator-min-microvolt = <2900000>;
+						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
 					};
 
@@ -203,6 +203,31 @@ pma8084_l27: l27 {
 		};
 	};
 
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
 	/delete-node/ vreg-boost;
 };
 
@@ -268,6 +293,15 @@ mux {
 				bias-disable;
 			};
 		};
+
+		i2c_touchkey_pins: i2c-touchkey {
+			mux {
+				pins = "gpio95", "gpio96";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
@@ -418,6 +452,14 @@ gpio_keys_pin_a: gpio-keys-active {
 				bias-pull-up;
 				power-source = <PMA8084_GPIO_S4>;
 			};
+
+			touchkey_pin: touchkey-int-pin {
+				pins = "gpio6";
+				function = "normal";
+				bias-disable;
+				input-enable;
+				power-source = <PMA8084_GPIO_S4>;
+			};
 		};
 	};
 };
-- 
2.27.0