From: Stephan Gerhold <stephan@gerhold.net>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
~postmarketos/upstreaming@lists.sr.ht
Subject: [PATCH 04/10] arm64: dts: qcom: msm8916: Add more labels
Date: Mon, 20 Jul 2020 10:54:00 +0200 [thread overview]
Message-ID: <20200720085406.6716-5-stephan@gerhold.net> (raw)
In-Reply-To: <20200720085406.6716-1-stephan@gerhold.net>
Add a few more labels to device nodes declared in msm8916.dtsi
so that we can set all needed properties using labels in the
board-specific device tree part.
Also rename the "otg" label to "usb" to allow grouping it with
the USB PHY (usb_hs_phy) node when ordering referenced labels
alphabetically.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 40 +++++++++++++--------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8b12961f3269..acbaed23bbdd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -781,7 +781,7 @@ sdhc_2: sdhci@7864000 {
status = "disabled";
};
- otg: usb@78d9000 {
+ usb: usb@78d9000 {
compatible = "qcom,ci-hdrc";
reg = <0x78d9000 0x200>,
<0x78d9200 0x200>;
@@ -809,7 +809,7 @@ usb_hs_phy: phy {
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
reset-names = "phy", "por";
qcom,init-seq = /bits/ 8 <0x0 0x44
0x1 0x6b 0x2 0x24 0x3 0x13>;
@@ -1151,7 +1151,7 @@ dsi_phy0: dsi-phy@1a98300 {
};
- hexagon@4080000 {
+ mpss: hexagon@4080000 {
compatible = "qcom,q6v5-pil";
reg = <0x04080000 0x100>,
<0x04020000 0x040>;
@@ -1289,7 +1289,7 @@ wifi {
};
};
- tpiu@820000 {
+ tpiu: tpiu@820000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0x820000 0x1000>;
@@ -1307,7 +1307,7 @@ tpiu_in: endpoint {
};
};
- funnel@821000 {
+ funnel0: funnel@821000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x821000 0x1000>;
@@ -1348,7 +1348,7 @@ funnel0_out: endpoint {
};
};
- replicator@824000 {
+ replicator: replicator@824000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0x824000 0x1000>;
@@ -1384,7 +1384,7 @@ replicator_in: endpoint {
};
};
- etf@825000 {
+ etf: etf@825000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x825000 0x1000>;
@@ -1410,7 +1410,7 @@ etf_out: endpoint {
};
};
- etr@826000 {
+ etr: etr@826000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x826000 0x1000>;
@@ -1428,7 +1428,7 @@ etr_in: endpoint {
};
};
- funnel@841000 { /* APSS funnel only 4 inputs are used */
+ funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x841000 0x1000>;
@@ -1476,7 +1476,7 @@ funnel1_out: endpoint {
};
};
- debug@850000 {
+ debug0: debug@850000 {
compatible = "arm,coresight-cpu-debug","arm,primecell";
reg = <0x850000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
@@ -1485,7 +1485,7 @@ debug@850000 {
status = "disabled";
};
- debug@852000 {
+ debug1: debug@852000 {
compatible = "arm,coresight-cpu-debug","arm,primecell";
reg = <0x852000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
@@ -1494,7 +1494,7 @@ debug@852000 {
status = "disabled";
};
- debug@854000 {
+ debug2: debug@854000 {
compatible = "arm,coresight-cpu-debug","arm,primecell";
reg = <0x854000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
@@ -1503,7 +1503,7 @@ debug@854000 {
status = "disabled";
};
- debug@856000 {
+ debug3: debug@856000 {
compatible = "arm,coresight-cpu-debug","arm,primecell";
reg = <0x856000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
@@ -1598,7 +1598,7 @@ etm3_out: endpoint {
/* System CTIs */
/* CTI 0 - TMC connections */
- cti@810000 {
+ cti0: cti@810000 {
compatible = "arm,coresight-cti", "arm,primecell";
reg = <0x810000 0x1000>;
@@ -1609,7 +1609,7 @@ cti@810000 {
};
/* CTI 1 - TPIU connections */
- cti@811000 {
+ cti1: cti@811000 {
compatible = "arm,coresight-cti", "arm,primecell";
reg = <0x811000 0x1000>;
@@ -1623,7 +1623,7 @@ cti@811000 {
/* Core CTIs; CTIs 12-15 */
/* CTI - CPU-0 */
- cti@858000 {
+ cti12: cti@858000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x858000 0x1000>;
@@ -1638,7 +1638,7 @@ cti@858000 {
};
/* CTI - CPU-1 */
- cti@859000 {
+ cti13: cti@859000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x859000 0x1000>;
@@ -1653,7 +1653,7 @@ cti@859000 {
};
/* CTI - CPU-2 */
- cti@85a000 {
+ cti14: cti@85a000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x85a000 0x1000>;
@@ -1668,7 +1668,7 @@ cti@85a000 {
};
/* CTI - CPU-3 */
- cti@85b000 {
+ cti15: cti@85b000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x85b000 0x1000>;
@@ -1821,7 +1821,7 @@ rpm {
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
- rpm-requests {
+ rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8916";
qcom,smd-channels = "rpm_requests";
--
2.27.0
next prev parent reply other threads:[~2020-07-20 8:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-20 8:53 [PATCH 00/10] Convert MSM8916 boards to use labels, reduce duplication Stephan Gerhold
2020-07-20 8:53 ` [PATCH 01/10] arm64: dts: qcom: apq8016-sbc: Remove properties that are already default Stephan Gerhold
2020-07-20 8:53 ` [PATCH 02/10] arm64: dts: qcom: msm8916: Declare sound node in msm8916.dtsi Stephan Gerhold
2020-07-20 8:53 ` [PATCH 03/10] arm64: dts: qcom: apq8016-sbc: Define leds outside of soc node Stephan Gerhold
2020-07-20 8:54 ` Stephan Gerhold [this message]
2020-07-20 8:54 ` [PATCH 05/10] arm64: dts: qcom: msm8916: Use labels in board device trees Stephan Gerhold
2020-07-20 8:54 ` [PATCH 06/10] arm64: dts: qcom: pm8916: Add resin node Stephan Gerhold
2020-07-20 8:54 ` [PATCH 07/10] arm64: dts: qcom: msm8916: Move PM8916-specific parts to msm8916-pm8916.dtsi Stephan Gerhold
2020-07-20 8:54 ` [PATCH 08/10] arm64: dts: qcom: msm8916: Move more supplies " Stephan Gerhold
2020-07-20 8:54 ` [PATCH 09/10] arm64: dts: qcom: msm8916: Set default pinctrl for blsp1_uart1/2 Stephan Gerhold
2020-07-20 8:54 ` [PATCH 10/10] arm64: dts: qcom: msm8916: Move common USB properties to msm8916.dtsi Stephan Gerhold
2020-09-14 9:43 ` [PATCH 00/10] Convert MSM8916 boards to use labels, reduce duplication Stephan Gerhold
2020-09-15 4:56 ` Bjorn Andersson
2020-09-15 7:16 ` Stephan Gerhold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200720085406.6716-5-stephan@gerhold.net \
--to=stephan@gerhold.net \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox