From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 1/2] ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
Date: Wed, 2 Sep 2020 18:51:58 +0200 [thread overview]
Message-ID: <20200902165159.7733-1-freifunk@adrianschmutzler.de> (raw)
This adds some additional DT labels which are handy when referring
to the nodes in derived DTS(I) files. It will also make the
definitions more consistent, e.g. by adding gsbi2_serial and
gsbi5_serial where we previously "only" had gsbi4_serial defined.
While at it, add missing spaces after some DT labels and remove one
useless empty line.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index c51481405e7f..c51f9fb4a0eb 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -20,7 +20,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -30,7 +30,7 @@
qcom,saw = <&saw0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -67,7 +67,7 @@
no-map;
};
- smem@41000000 {
+ smem: smem@41000000 {
reg = <0x41000000 0x200000>;
no-map;
};
@@ -251,7 +251,7 @@
syscon-tcsr = <&tcsr>;
- serial@12490000 {
+ gsbi2_serial: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -273,7 +273,6 @@
#address-cells = <1>;
#size-cells = <0>;
};
-
};
gsbi4: gsbi@16300000 {
@@ -326,7 +325,7 @@
syscon-tcsr = <&tcsr>;
- serial@1a240000 {
+ gsbi5_serial: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;
@@ -397,7 +396,7 @@
status = "disabled";
};
- sata@29000000 {
+ sata: sata@29000000 {
compatible = "qcom,ipq806x-ahci", "generic-ahci";
reg = <0x29000000 0x180>;
@@ -720,7 +719,7 @@
regulator-always-on;
};
- sdcc1bam:dma@12402000 {
+ sdcc1bam: dma@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -730,7 +729,7 @@
qcom,ee = <0>;
};
- sdcc3bam:dma@12182000 {
+ sdcc3bam: dma@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -740,13 +739,13 @@
qcom,ee = <0>;
};
- amba {
+ amba: amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc@12400000 {
+ sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -766,7 +765,7 @@
dma-names = "tx", "rx";
};
- sdcc@12180000 {
+ sdcc3: sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
--
2.20.1
next reply other threads:[~2020-09-02 16:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-02 16:51 Adrian Schmutzler [this message]
2020-09-02 16:51 ` [PATCH 2/2] ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3 Adrian Schmutzler
2021-01-22 21:40 ` [PATCH 1/2] ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200902165159.7733-1-freifunk@adrianschmutzler.de \
--to=freifunk@adrianschmutzler.de \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox