From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org,
Elliot Berman <eberman@codeaurora.org>
Subject: Re: [PATCH v3 2/2] venus: firmware: Set virtual address ranges
Date: Thu, 10 Sep 2020 09:26:21 -0500 [thread overview]
Message-ID: <20200910142621.GA6485@tuxbook-pro> (raw)
In-Reply-To: <20200910075227.950-3-stanimir.varbanov@linaro.org>
On Thu 10 Sep 02:52 CDT 2020, Stanimir Varbanov wrote:
> In order to boot some of the new Venus firmware versions TZ call to set
> virtual address ranges is needed. Add virtual address ranges for CP and
> CP_NONPIX in resource structure and use them when loading and booting
> the firmware on remote processor.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> ---
> drivers/media/platform/qcom/venus/core.c | 4 ++++
> drivers/media/platform/qcom/venus/core.h | 4 ++++
> drivers/media/platform/qcom/venus/firmware.c | 19 ++++++++++++++++++-
> 3 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index c5af42873aed..3549a094e860 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -540,6 +540,10 @@ static const struct venus_resources sdm845_res_v2 = {
> .vmem_size = 0,
> .vmem_addr = 0,
> .dma_mask = 0xe0000000 - 1,
> + .cp_start = 0,
> + .cp_size = 0x70800000,
> + .cp_nonpixel_start = 0x1000000,
> + .cp_nonpixel_size = 0x24800000,
> .fwname = "qcom/venus-5.2/venus.mdt",
> };
>
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 1a7aee7ee628..3e3f0138e3c3 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -77,6 +77,10 @@ struct venus_resources {
> unsigned int vmem_id;
> u32 vmem_size;
> u32 vmem_addr;
> + u32 cp_start;
> + u32 cp_size;
> + u32 cp_nonpixel_start;
> + u32 cp_nonpixel_size;
> const char *fwname;
> };
>
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 8801a6a7543d..1db64a854b88 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -181,6 +181,7 @@ static int venus_shutdown_no_tz(struct venus_core *core)
> int venus_boot(struct venus_core *core)
> {
> struct device *dev = core->dev;
> + const struct venus_resources *res = core->res;
> phys_addr_t mem_phys;
> size_t mem_size;
> int ret;
> @@ -200,7 +201,23 @@ int venus_boot(struct venus_core *core)
> else
> ret = venus_boot_no_tz(core, mem_phys, mem_size);
>
> - return ret;
> + if (ret)
> + return ret;
> +
> + if (core->use_tz && res->cp_size) {
> + ret = qcom_scm_mem_protect_video_var(res->cp_start,
> + res->cp_size,
> + res->cp_nonpixel_start,
> + res->cp_nonpixel_size);
> + if (ret) {
> + qcom_scm_pas_shutdown(VENUS_PAS_ID);
> + dev_err(dev, "set virtual address ranges fail (%d)\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> }
>
> int venus_shutdown(struct venus_core *core)
> --
> 2.17.1
>
prev parent reply other threads:[~2020-09-10 21:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 7:52 [PATCH v3 0/2] Venus - fix firmware load failure Stanimir Varbanov
2020-09-10 7:52 ` [PATCH v3 1/2] firmware: qcom_scm: Add memory protect virtual address ranges Stanimir Varbanov
2020-09-10 7:52 ` [PATCH v3 2/2] venus: firmware: Set " Stanimir Varbanov
2020-09-10 14:26 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200910142621.GA6485@tuxbook-pro \
--to=bjorn.andersson@linaro.org \
--cc=eberman@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=stanimir.varbanov@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox