From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH] arm64: dts: sm8250: Add OPP table for all qup devices
Date: Tue, 15 Sep 2020 15:02:03 +0300 [thread overview]
Message-ID: <20200915120203.290295-1-dmitry.baryshkov@linaro.org> (raw)
qup has a requirement to vote on the performance state of the CX domain
in sm8250 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 69 ++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c989bc1370ab..6cd45a667ba9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -411,6 +411,25 @@ ipcc: mailbox@408000 {
#mbox-cells = <2>;
};
+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -445,6 +464,8 @@ spi14: spi@880000 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -471,6 +492,8 @@ spi15: spi@884000 {
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -497,6 +520,8 @@ spi16: spi@888000 {
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -523,6 +548,8 @@ spi17: spi@88c000 {
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -534,6 +561,8 @@ uart17: serial@88c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -560,6 +589,8 @@ spi18: spi@890000 {
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -571,6 +602,8 @@ uart18: serial@890000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -597,6 +630,8 @@ spi19: spi@894000 {
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -635,6 +670,8 @@ spi0: spi@980000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -661,6 +698,8 @@ spi1: spi@984000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -687,6 +726,8 @@ spi2: spi@988000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -698,6 +739,8 @@ uart2: serial@988000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -724,6 +767,8 @@ spi3: spi@98c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -750,6 +795,8 @@ spi4: spi@990000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -776,6 +823,8 @@ spi5: spi@994000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -802,6 +851,8 @@ spi6: spi@998000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -813,6 +864,8 @@ uart6: serial@998000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -839,6 +892,8 @@ spi7: spi@99c000 {
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -877,6 +932,8 @@ spi8: spi@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -903,6 +960,8 @@ spi9: spi@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -929,6 +988,8 @@ spi10: spi@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -955,6 +1016,8 @@ spi11: spi@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -981,6 +1044,8 @@ spi12: spi@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -992,6 +1057,8 @@ uart12: serial@a90000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1018,6 +1085,8 @@ spi13: spi@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
--
2.28.0
next reply other threads:[~2020-09-15 12:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-15 12:02 Dmitry Baryshkov [this message]
2020-09-15 12:18 ` [PATCH] arm64: dts: sm8250: Add OPP table for all qup devices Manivannan Sadhasivam
2020-09-15 15:08 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200915120203.290295-1-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox