[PATCH 09/10] arm64: dts: qcom: msm8916: Use power domains for MSS/WCNSS remoteprocs

[Stephan Gerhold <stephan@gerhold.net>]

So far we have been making proxy votes for the remote processors
through the regulator interface. Now that we have rpmpd it's better
to vote for performance states through the power domain interface.

This also allows us to move these supplies back to msm8916.dtsi
because the device tree binding for RPMPD is independent of the
underlying regulator/PMIC.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi | 3 ---
 arch/arm64/boot/dts/qcom/msm8916.dtsi        | 9 +++++++++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
index cd626e7db599..513e433aa5f3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -17,13 +17,10 @@ &dsi_phy0 {
 };
 
 &mpss {
-	cx-supply = <&pm8916_s1>;
-	mx-supply = <&pm8916_l3>;
 	pll-supply = <&pm8916_l7>;
 };
 
 &pronto {
-	vddmx-supply = <&pm8916_l3>;
 	vddpx-supply = <&pm8916_l7>;
 
 	iris {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 117804f94c35..74aa50f3db10 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8916.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -1292,6 +1293,10 @@ mpss: remoteproc@4080000 {
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
 			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
 				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
@@ -1689,6 +1694,10 @@ pronto: remoteproc@a21b000 {
 					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
 			qcom,state = <&wcnss_smp2p_out 0>;
 			qcom,state-names = "stop";
 
-- 
2.28.0