From: kholk11@gmail.com
To: agross@kernel.org
Cc: bjorn.andersson@linaro.org, sboyd@kernel.org, kholk11@gmail.com,
marijns95@gmail.com, konradybcio@gmail.com,
martin.botka1@gmail.com, linux-arm-msm@vger.kernel.org,
phone-devel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
Date: Sat, 26 Sep 2020 15:02:25 +0200 [thread overview]
Message-ID: <20200926130225.13733-5-kholk11@gmail.com> (raw)
In-Reply-To: <20200926130225.13733-1-kholk11@gmail.com>
From: AngeloGioacchino Del Regno <kholk11@gmail.com>
In commit 8c5dc88b064d the gfx3d ping-pong ops (clk_gfx3d_ops)
were generalized in order to be able to reuse the same ops for
more than just one clock for one SoC: follow the change here in
the MSM8996 MMCC.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
drivers/clk/qcom/mmcc-msm8996.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/qcom/mmcc-msm8996.c b/drivers/clk/qcom/mmcc-msm8996.c
index 3b3aac07fb2d..24843e4f2599 100644
--- a/drivers/clk/qcom/mmcc-msm8996.c
+++ b/drivers/clk/qcom/mmcc-msm8996.c
@@ -528,16 +528,23 @@ static struct clk_rcg2 maxi_clk_src = {
},
};
-static struct clk_rcg2 gfx3d_clk_src = {
- .cmd_rcgr = 0x4000,
- .hid_width = 5,
- .parent_map = mmss_xo_mmpll0_mmpll9_mmpll2_mmpll8_gpll0_map,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gfx3d_clk_src",
- .parent_names = mmss_xo_mmpll0_mmpll9_mmpll2_mmpll8_gpll0,
- .num_parents = 6,
- .ops = &clk_gfx3d_ops,
- .flags = CLK_SET_RATE_PARENT,
+static struct clk_rcg2_gfx3d gfx3d_clk_src = {
+ .rcg = {
+ .cmd_rcgr = 0x4000,
+ .hid_width = 5,
+ .parent_map = mmss_xo_mmpll0_mmpll9_mmpll2_mmpll8_gpll0_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gfx3d_clk_src",
+ .parent_names = mmss_xo_mmpll0_mmpll9_mmpll2_mmpll8_gpll0,
+ .num_parents = 6,
+ .ops = &clk_gfx3d_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+ .hws = (struct clk_hw*[]) {
+ &mmpll9.clkr.hw,
+ &mmpll2.clkr.hw,
+ &mmpll8.clkr.hw
},
};
@@ -3089,7 +3096,7 @@ static struct clk_regmap *mmcc_msm8996_clocks[] = {
[AHB_CLK_SRC] = &ahb_clk_src.clkr,
[AXI_CLK_SRC] = &axi_clk_src.clkr,
[MAXI_CLK_SRC] = &maxi_clk_src.clkr,
- [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
+ [GFX3D_CLK_SRC] = &gfx3d_clk_src.rcg.clkr,
[RBBMTIMER_CLK_SRC] = &rbbmtimer_clk_src.clkr,
[ISENSE_CLK_SRC] = &isense_clk_src.clkr,
[RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr,
--
2.28.0
prev parent reply other threads:[~2020-09-26 13:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-26 13:02 [PATCH 0/4] Qualcomm clock fixes and preparation for SDM660 kholk11
2020-09-26 13:02 ` [PATCH 1/4] clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical kholk11
2020-09-26 13:02 ` [PATCH 2/4] clk: qcom: gcc-sdm660: Mark GPU " kholk11
2020-09-26 13:02 ` [PATCH 3/4] clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers kholk11
2020-09-26 13:02 ` kholk11 [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200926130225.13733-5-kholk11@gmail.com \
--to=kholk11@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=konradybcio@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijns95@gmail.com \
--cc=martin.botka1@gmail.com \
--cc=phone-devel@vger.kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox