From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
tiwai@suse.com, srinivas.kandagatla@linaro.org,
rohitkr@codeaurora.org, linux-arm-msm@vger.kernel.org,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, swboyd@chromium.org
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Subject: [PATCH] ASoC: qcom: Fix typo error in HDMI regmap config callbacks
Date: Tue, 2 Feb 2021 11:57:27 +0530 [thread overview]
Message-ID: <20210202062727.22469-1-srivasam@codeaurora.org> (raw)
Had a typo in lpass platform driver that resulted in crash
during suspend/resume with an HDMI dongle connected.
The regmap read/write/volatile regesters validation callbacks in lpass-cpu
were using MI2S rdma_channels count instead of hdmi_rdma_channels.
This typo error causing to read registers from the regmap beyond the length
of the mapping created by ioremap().
This fix avoids the need for reducing number hdmi_rdma_channels,
which is done in
commit 7dfe20ee92f6 ("ASoC: qcom: Fix number of HDMI RDMA channels on sc7180").
So reverting the same.
Fixes: 7cb37b7bd0d3c ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
---
sound/soc/qcom/lpass-cpu.c | 8 ++++----
sound/soc/qcom/lpass-sc7180.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index a669202e0001..c642e5f8f28c 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -595,7 +595,7 @@ static bool lpass_hdmi_regmap_writeable(struct device *dev, unsigned int reg)
return true;
}
- for (i = 0; i < v->rdma_channels; ++i) {
+ for (i = 0; i < v->hdmi_rdma_channels; ++i) {
if (reg == LPAIF_HDMI_RDMACTL_REG(v, i))
return true;
if (reg == LPAIF_HDMI_RDMABASE_REG(v, i))
@@ -641,7 +641,7 @@ static bool lpass_hdmi_regmap_readable(struct device *dev, unsigned int reg)
if (reg == LPASS_HDMITX_APP_IRQSTAT_REG(v))
return true;
- for (i = 0; i < v->rdma_channels; ++i) {
+ for (i = 0; i < v->hdmi_rdma_channels; ++i) {
if (reg == LPAIF_HDMI_RDMACTL_REG(v, i))
return true;
if (reg == LPAIF_HDMI_RDMABASE_REG(v, i))
@@ -668,7 +668,7 @@ static bool lpass_hdmi_regmap_volatile(struct device *dev, unsigned int reg)
if (reg == LPASS_HDMI_TX_LEGACY_ADDR(v))
return true;
- for (i = 0; i < v->rdma_channels; ++i) {
+ for (i = 0; i < v->hdmi_rdma_channels; ++i) {
if (reg == LPAIF_HDMI_RDMACURR_REG(v, i))
return true;
}
@@ -812,7 +812,7 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
return PTR_ERR(drvdata->hdmiif);
lpass_hdmi_regmap_config.max_register = LPAIF_HDMI_RDMAPER_REG(variant,
- variant->hdmi_rdma_channels);
+ variant->hdmi_rdma_channels - 1);
drvdata->hdmiif_map = devm_regmap_init_mmio(dev, drvdata->hdmiif,
&lpass_hdmi_regmap_config);
if (IS_ERR(drvdata->hdmiif_map)) {
diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c
index 735c9dac28f2..8c168d3c589e 100644
--- a/sound/soc/qcom/lpass-sc7180.c
+++ b/sound/soc/qcom/lpass-sc7180.c
@@ -171,7 +171,7 @@ static struct lpass_variant sc7180_data = {
.rdma_channels = 5,
.hdmi_rdma_reg_base = 0x64000,
.hdmi_rdma_reg_stride = 0x1000,
- .hdmi_rdma_channels = 3,
+ .hdmi_rdma_channels = 4,
.dmactl_audif_start = 1,
.wrdma_reg_base = 0x18000,
.wrdma_reg_stride = 0x1000,
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next reply other threads:[~2021-02-02 6:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 6:27 Srinivasa Rao Mandadapu [this message]
2021-02-02 15:34 ` [PATCH] ASoC: qcom: Fix typo error in HDMI regmap config callbacks Mark Brown
2021-02-02 17:13 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202062727.22469-1-srivasam@codeaurora.org \
--to=srivasam@codeaurora.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=plai@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=rohitkr@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox