From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Abhinav Kumar <abhinavk@codeaurora.org>,
Jonathan Marek <jonathan@marek.ca>,
Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-clk@vger.kernel.org
Subject: [PATCH v3 06/25] drm/msm/dsi: drop multiple pll enable_seq support
Date: Sat, 27 Mar 2021 14:02:46 +0300 [thread overview]
Message-ID: <20210327110305.3289784-7-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210327110305.3289784-1-dmitry.baryshkov@linaro.org>
The only PLL using multiple enable sequences is the 28nm PLL, which just
does the single step in the loop. Push that support back into the PLL
code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 3 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 23 +++++--
.../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 3 +-
drivers/gpu/drm/msm/dsi/phy/dsi_pll.c | 65 +++++++------------
drivers/gpu/drm/msm/dsi/phy/dsi_pll.h | 4 +-
5 files changed, 42 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 6a63901da7a4..4386edfa91fe 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -1087,8 +1087,7 @@ struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
pll_14nm->vco_delay = 1;
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_14nm_enable_seq;
+ pll->enable_seq = dsi_pll_14nm_enable_seq;
ret = pll_14nm_register(pll_14nm);
if (ret) {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 2f502efa4dd5..760cf7956fa2 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -311,7 +311,7 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
/*
* PLL Callbacks
*/
-static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+static int _dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
struct device *dev = &pll_28nm->pdev->dev;
@@ -386,6 +386,19 @@ static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
return locked ? 0 : -EINVAL;
}
+static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+{
+ int i, ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = _dsi_pll_28nm_enable_seq_hpm(pll);
+ if (!ret)
+ return 0;
+ }
+
+ return ret;
+}
+
static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
@@ -619,15 +632,11 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev,
if (type == MSM_DSI_PHY_28NM_HPM) {
pll_28nm->vco_delay = 1;
- pll->en_seq_cnt = 3;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm;
- pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm;
- pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm;
+ pll->enable_seq = dsi_pll_28nm_enable_seq_hpm;
} else if (type == MSM_DSI_PHY_28NM_LP) {
pll_28nm->vco_delay = 1000;
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp;
+ pll->enable_seq = dsi_pll_28nm_enable_seq_lp;
} else {
DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type);
return ERR_PTR(-EINVAL);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index 4a40513057e8..2cfb7edf91d8 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -515,8 +515,7 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
pll->save_state = dsi_pll_28nm_save_state;
pll->restore_state = dsi_pll_28nm_restore_state;
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
+ pll->enable_seq = dsi_pll_28nm_enable_seq;
ret = pll_28nm_register(pll_28nm);
if (ret) {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
index 3dc65877fa10..9e9fa90bf504 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
@@ -5,46 +5,6 @@
#include "dsi_pll.h"
-static int dsi_pll_enable(struct msm_dsi_pll *pll)
-{
- int i, ret = 0;
-
- /*
- * Certain PLLs do not allow VCO rate update when it is on.
- * Keep track of their status to turn on/off after set rate success.
- */
- if (unlikely(pll->pll_on))
- return 0;
-
- /* Try all enable sequences until one succeeds */
- for (i = 0; i < pll->en_seq_cnt; i++) {
- ret = pll->enable_seqs[i](pll);
- DBG("DSI PLL %s after sequence #%d",
- ret ? "unlocked" : "locked", i + 1);
- if (!ret)
- break;
- }
-
- if (ret) {
- DRM_ERROR("DSI PLL failed to lock\n");
- return ret;
- }
-
- pll->pll_on = true;
-
- return 0;
-}
-
-static void dsi_pll_disable(struct msm_dsi_pll *pll)
-{
- if (unlikely(!pll->pll_on))
- return;
-
- pll->disable_seq(pll);
-
- pll->pll_on = false;
-}
-
/*
* DSI PLL Helper functions
*/
@@ -64,15 +24,36 @@ long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw)
{
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ int ret = 0;
- return dsi_pll_enable(pll);
+ /*
+ * Certain PLLs do not allow VCO rate update when it is on.
+ * Keep track of their status to turn on/off after set rate success.
+ */
+ if (unlikely(pll->pll_on))
+ return 0;
+
+ ret = pll->enable_seq(pll);
+ if (ret) {
+ DRM_ERROR("DSI PLL failed to lock\n");
+ return ret;
+ }
+
+ pll->pll_on = true;
+
+ return 0;
}
void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw)
{
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- dsi_pll_disable(pll);
+ if (unlikely(!pll->pll_on))
+ return;
+
+ pll->disable_seq(pll);
+
+ pll->pll_on = false;
}
void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
index bbecb1de5678..eebf90671eec 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
@@ -12,7 +12,6 @@
#include "dsi.h"
#define NUM_DSI_CLOCKS_MAX 6
-#define MAX_DSI_PLL_EN_SEQS 10
struct msm_dsi_pll {
enum msm_dsi_phy_type type;
@@ -23,9 +22,8 @@ struct msm_dsi_pll {
unsigned long min_rate;
unsigned long max_rate;
- u32 en_seq_cnt;
- int (*enable_seqs[MAX_DSI_PLL_EN_SEQS])(struct msm_dsi_pll *pll);
+ int (*enable_seq)(struct msm_dsi_pll *pll);
void (*disable_seq)(struct msm_dsi_pll *pll);
int (*get_provider)(struct msm_dsi_pll *pll,
struct clk **byte_clk_provider,
--
2.30.2
next prev parent reply other threads:[~2021-03-27 11:03 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-27 11:02 [PATCH v3 00/25] drm/msm/dsi: refactor MSM DSI PHY/PLL drivers Dmitry Baryshkov
2021-03-27 11:02 ` [PATCH v3 01/25] clk: fixed: add devm helper for clk_hw_register_fixed_factor() Dmitry Baryshkov
2021-03-29 21:55 ` abhinavk
2021-03-27 11:02 ` [PATCH v3 02/25] clk: mux: provide devm_clk_hw_register_mux() Dmitry Baryshkov
2021-03-30 0:46 ` Stephen Boyd
2021-03-27 11:02 ` [PATCH v3 03/25] clk: divider: add devm_clk_hw_register_divider Dmitry Baryshkov
2021-03-30 0:46 ` Stephen Boyd
2021-03-27 11:02 ` [PATCH v3 04/25] drm/msm/dsi: replace PHY's init callback with configurable data Dmitry Baryshkov
2021-03-27 11:02 ` Dmitry Baryshkov [this message]
2021-03-27 11:02 ` [PATCH v3 07/25] drm/msm/dsi: move all PLL callbacks into PHY config struct Dmitry Baryshkov
2021-03-27 11:02 ` [PATCH v3 08/25] drm/msm/dsi: drop global msm_dsi_phy_type enumaration Dmitry Baryshkov
2021-03-27 11:02 ` [PATCH v3 09/25] drm/msm/dsi: move min/max PLL rate to phy config Dmitry Baryshkov
2021-03-27 11:02 ` [PATCH v3 10/25] drm/msm/dsi: remove msm_dsi_pll_set_usecase Dmitry Baryshkov
2021-03-27 11:02 ` [PATCH v3 11/25] drm/msm/dsi: push provided clocks handling into a generic code Dmitry Baryshkov
2021-03-29 22:12 ` [Freedreno] " abhinavk
2021-03-27 11:02 ` [PATCH v3 12/25] drm/msm/dsi: use devm_clk_*register to registe DSI PHY clocks Dmitry Baryshkov
2021-03-29 23:33 ` [Freedreno] " abhinavk
2021-03-30 0:49 ` Stephen Boyd
2021-03-27 11:02 ` [PATCH v3 13/25] drm/msm/dsi: use devm_of_clk_add_hw_provider Dmitry Baryshkov
2021-03-29 23:43 ` [Freedreno] " abhinavk
2021-03-30 0:50 ` Stephen Boyd
2021-03-27 11:02 ` [PATCH v3 14/25] drm/msm/dsi: make save/restore_state phy-level functions Dmitry Baryshkov
2021-03-29 23:51 ` [Freedreno] " abhinavk
2021-03-27 11:02 ` [PATCH v3 15/25] drm/msm/dsi: drop vco_delay setting from 7nm, 10nm, 14nm drivers Dmitry Baryshkov
2021-03-30 0:01 ` [Freedreno] " abhinavk
2021-03-27 11:02 ` [PATCH v3 16/25] drm/msm/dpu: simplify vco_delay handling in dsi_phy_28nm driver Dmitry Baryshkov
2021-03-30 0:03 ` [Freedreno] " abhinavk
2021-03-27 11:02 ` [PATCH v3 17/25] drm/msi/dsi: inline msm_dsi_pll_helper_clk_prepare/unprepare Dmitry Baryshkov
2021-03-30 0:50 ` [Freedreno] " abhinavk
2021-03-27 11:02 ` [PATCH v3 18/25] drm/msm/dsi: make save_state/restore_state callbacks accept msm_dsi_phy Dmitry Baryshkov
2021-03-30 3:09 ` abhinavk
2021-03-27 11:02 ` [PATCH v3 19/25] drm/msm/dsi: drop msm_dsi_pll abstracton Dmitry Baryshkov
2021-03-30 3:13 ` [Freedreno] " abhinavk
2021-03-30 3:35 ` abhinavk
2021-03-27 11:03 ` [PATCH v3 20/25] drm/msm/dsi: drop PLL accessor functions Dmitry Baryshkov
2021-03-30 3:16 ` [Freedreno] " abhinavk
2021-03-27 11:03 ` [PATCH v3 21/25] drm/msm/dsi: move ioremaps to dsi_phy_driver_probe Dmitry Baryshkov
2021-03-30 3:18 ` [Freedreno] " abhinavk
2021-03-27 11:03 ` [PATCH v3 22/25] drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances Dmitry Baryshkov
2021-03-30 3:23 ` abhinavk
2021-03-27 11:03 ` [PATCH v3 23/25] drm/msm/dsi: remove temp data from global pll structure Dmitry Baryshkov
2021-03-30 3:26 ` [Freedreno] " abhinavk
2021-03-30 15:23 ` Dmitry Baryshkov
2021-03-27 11:03 ` [PATCH v3 24/25] drm/msm/dsi: inline msm_dsi_phy_set_src_pll Dmitry Baryshkov
2021-03-30 3:34 ` [Freedreno] " abhinavk
2021-03-30 13:42 ` Dmitry Baryshkov
2021-03-30 17:44 ` abhinavk
2021-03-27 11:03 ` [PATCH v3 25/25] drm/msm/dsi: stop passing src_pll_id to the phy_enable call Dmitry Baryshkov
2021-03-30 19:29 ` [Freedreno] " abhinavk
2021-03-30 1:31 ` [PATCH v3 00/25] drm/msm/dsi: refactor MSM DSI PHY/PLL drivers Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210327110305.3289784-7-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=abhinavk@codeaurora.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robdclark@gmail.com \
--cc=sboyd@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox