From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Loic Poulain <loic.poulain@linaro.org>
Cc: hemantk@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 1/2] bus: mhi: core: Fix MHI runtime_pm behavior
Date: Wed, 31 Mar 2021 22:42:52 +0530 [thread overview]
Message-ID: <20210331171252.GK15610@work> (raw)
In-Reply-To: <1614963744-25962-1-git-send-email-loic.poulain@linaro.org>
On Fri, Mar 05, 2021 at 06:02:23PM +0100, Loic Poulain wrote:
> This change ensures that PM reference is always get during packet
> queueing and released either after queuing completion (RX) or once
> the buffer has been consumed (TX). This guarantees proper update for
> underlying MHI controller runtime status (e.g. last_busy timestamp)
> and prevents suspend to be triggered while TX packets are flying,
> or before we completed update of the RX ring.
>
Any reason why you didn't wait for RX completion also?
Thanks,
Mani
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
> drivers/bus/mhi/core/main.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index c780234..16b9640 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -584,8 +584,11 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> /* notify client */
> mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>
> - if (mhi_chan->dir == DMA_TO_DEVICE)
> + if (mhi_chan->dir == DMA_TO_DEVICE) {
> atomic_dec(&mhi_cntrl->pending_pkts);
> + /* Release the reference got from mhi_queue() */
> + mhi_cntrl->runtime_put(mhi_cntrl);
> + }
>
> /*
> * Recycle the buffer if buffer is pre-allocated,
> @@ -1021,9 +1024,11 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
> if (unlikely(ret))
> goto exit_unlock;
>
> - /* trigger M3 exit if necessary */
> - if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state))
> - mhi_trigger_resume(mhi_cntrl);
> + /* Packet is queued, take a usage ref to exit M3 if necessary
> + * for host->device buffer, balanced put is done on buffer completion
> + * for device->host buffer, balanced put is after ringing the DB
> + */
> + mhi_cntrl->runtime_get(mhi_cntrl);
>
> /* Assert dev_wake (to exit/prevent M1/M2)*/
> mhi_cntrl->wake_toggle(mhi_cntrl);
> @@ -1034,6 +1039,9 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
> if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)))
> mhi_ring_chan_db(mhi_cntrl, mhi_chan);
>
> + if (dir == DMA_FROM_DEVICE)
> + mhi_cntrl->runtime_put(mhi_cntrl);
> +
> exit_unlock:
> read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
>
> @@ -1431,6 +1439,10 @@ static void mhi_reset_data_chan(struct mhi_controller *mhi_cntrl,
> result.buf_addr = buf_info->cb_buf;
> mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
> }
> +
> + /* Release the reference got from mhi_queue() */
> + if (mhi_chan->dir == DMA_TO_DEVICE)
> + mhi_cntrl->runtime_put(mhi_cntrl);
> }
> }
>
> --
> 2.7.4
>
next prev parent reply other threads:[~2021-03-31 17:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-05 17:02 [PATCH 1/2] bus: mhi: core: Fix MHI runtime_pm behavior Loic Poulain
2021-03-05 17:02 ` [PATCH 2/2] bus: mhi: pm: reduce PM state change verbosity Loic Poulain
2021-04-05 18:51 ` Bhaumik Bhatt
2021-03-31 17:12 ` Manivannan Sadhasivam [this message]
[not found] ` <CAMZdPi-M5fYPs7QfsBx4Gy6ywCLue5yqJLn0XthGhTeON1wWfw@mail.gmail.com>
2021-03-31 18:27 ` [PATCH 1/2] bus: mhi: core: Fix MHI runtime_pm behavior Manivannan Sadhasivam
2021-04-05 18:46 ` Bhaumik Bhatt
2021-04-06 3:54 ` Hemant Kumar
2021-04-06 8:29 ` Loic Poulain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210331171252.GK15610@work \
--to=manivannan.sadhasivam@linaro.org \
--cc=hemantk@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=loic.poulain@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox