linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
	jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
	carl.yin@quectel.com, naveen.kumar@quectel.com,
	loic.poulain@linaro.org
Subject: Re: [PATCH v6 1/2] bus: mhi: core: Introduce internal register poll helper function
Date: Thu, 1 Apr 2021 00:08:27 +0530	[thread overview]
Message-ID: <20210331183827.GM15610@work> (raw)
In-Reply-To: <1617215665-19593-2-git-send-email-bbhatt@codeaurora.org>

On Wed, Mar 31, 2021 at 11:34:24AM -0700, Bhaumik Bhatt wrote:
> Introduce helper function to allow MHI core driver to poll for
> a value in a register field. This helps reach a common path to
> read and poll register values along with a retry time interval.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Loic Poulain <loic.poulain@linaro.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/internal.h |  3 +++
>  drivers/bus/mhi/core/main.c     | 23 +++++++++++++++++++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
> index 7aa5cfd..e690f15 100644
> --- a/drivers/bus/mhi/core/internal.h
> +++ b/drivers/bus/mhi/core/internal.h
> @@ -646,6 +646,9 @@ int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,
>  int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
>  				    void __iomem *base, u32 offset, u32 mask,
>  				    u32 shift, u32 *out);
> +int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
> +				    void __iomem *base, u32 offset, u32 mask,
> +				    u32 shift, u32 val, u32 delayus);
>  void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
>  		   u32 offset, u32 val);
>  void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base,
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 8b68657..58b8111 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -4,6 +4,7 @@
>   *
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/device.h>
>  #include <linux/dma-direction.h>
>  #include <linux/dma-mapping.h>
> @@ -37,6 +38,28 @@ int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
>  	return 0;
>  }
>  
> +int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
> +				    void __iomem *base, u32 offset,
> +				    u32 mask, u32 shift, u32 val, u32 delayus)
> +{
> +	int ret;
> +	u32 out, retry = (mhi_cntrl->timeout_ms * 1000) / delayus;
> +
> +	while (retry--) {
> +		ret = mhi_read_reg_field(mhi_cntrl, base, offset, mask, shift,
> +					 &out);
> +		if (ret)
> +			return ret;
> +
> +		if (out == val)
> +			return 0;
> +
> +		fsleep(delayus);
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
>  void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
>  		   u32 offset, u32 val)
>  {
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply	other threads:[~2021-03-31 18:39 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-31 18:34 [PATCH v6 0/2] Polling for MHI ready Bhaumik Bhatt
2021-03-31 18:34 ` [PATCH v6 1/2] bus: mhi: core: Introduce internal register poll helper function Bhaumik Bhatt
2021-03-31 18:38   ` Manivannan Sadhasivam [this message]
2021-03-31 18:34 ` [PATCH v6 2/2] bus: mhi: core: Move to polling method to wait for MHI ready Bhaumik Bhatt
2021-03-31 18:39   ` Manivannan Sadhasivam
2021-03-31 18:41 ` [PATCH v6 0/2] Polling " Manivannan Sadhasivam
2021-05-26 19:03 ` patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210331183827.GM15610@work \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=bbhatt@codeaurora.org \
    --cc=carl.yin@quectel.com \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=naveen.kumar@quectel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).