[PATCH v3 4/4] arm64: dts: qcom: sdm845: add required clocks on the gcc

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Specify input clocks to the SDM845's Global Clock Controller as required
by the bindings.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..86f717d5bfb6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1061,6 +1061,16 @@ soc: soc@0 {
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sdm845";
 			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie0_lane>,
+				 <&pcie1_lane>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2062,6 +2072,7 @@ pcie0_lane: lanes@1c06200 {
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clock-output-names = "pcie_0_pipe_clk";
 			};
@@ -2170,6 +2181,7 @@ pcie1_lane: lanes@1c06200 {
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clock-output-names = "pcie_1_pipe_clk";
 			};
-- 
2.30.2