[PATCH AUTOSEL 5.12 053/102] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)

[PATCH AUTOSEL 5.12 053/102] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 0a275a35ceab07cb622ff212c54d6866e246ac53 ]

Fix the compatible to make the driver probe and tell the
driver where to look for the "xo" clock to make sure everything
works.

Then we get a happy (eh, happier) 8996:

somainline-sdcard:/home/konrad# cat /sys/kernel/debug/clk/pwrcl_pll/clk_rate
1152000000

Don't backport without "arm64: dts: qcom: msm8996: Add CPU opps", as
the system fails to boot without consumers for these clocks.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210527192958.775434-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..dd89d3cb772b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1745,9 +1745,14 @@ apss_merge_funnel_out: endpoint {
 				};
 			};
 		};
+
 		kryocc: clock-controller@6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x06400000 0x90000>;
+
+			clock-names = "xo";
+			clocks = <&xo_board>;
+
 			#clock-cells = <1>;
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 054/102] arm64: dts: qcom: sc7180: Move rmtfs memory region

[Sasha Levin]

From: Sujit Kautkar <sujitka@chromium.org>

[ Upstream commit d4282fb4f8f9683711ae6c076da16aa8e675fdbd ]

Move rmtfs memory region so that it does not overlap with system
RAM (kernel data) when KAsan is enabled. This puts rmtfs right
after mba_mem which is not supposed to increase beyond 0x94600000

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a..afe0f9c25816 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -45,7 +45,7 @@ chosen {
 
 /* Increase the size from 2MB to 8MB */
 &rmtfs_mem {
-	reg = <0x0 0x84400000 0x0 0x800000>;
+	reg = <0x0 0x94600000 0x0 0x800000>;
 };
 
 / {
-- 
2.30.2

[PATCH AUTOSEL 5.12 087/102] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit dc2f86369b157dfe4dccd31497d2e3c541e7239d ]

The previous one was likely a mistaken copy from pcie1_lane.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613185334.306225-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 46a6c18cea91..ee11a6d143e4 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1509,7 +1509,7 @@ pcie2_phy: phy@1c16000 {
 
 			status = "disabled";
 
-			pcie2_lane: lanes@1c0e200 {
+			pcie2_lane: lanes@1c16200 {
 				reg = <0 0x1c16200 0 0x170>, /* tx0 */
 				      <0 0x1c16400 0 0x200>, /* rx0 */
 				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-- 
2.30.2

[PATCH AUTOSEL 5.12 088/102] arm64: dts: qcom: sm8150: Disable Adreno and modem by default

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit b1dc3c6b3dabbedaf896a3c1a998da191c311c70 ]

Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.

Not enabling modem back on the HDK, as it uses a sa8150.

Also fixed a sorting mistake in both boards' dt while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210611203301.101067-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150.dtsi    |  6 ++++++
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index fb2cf3d987a1..50ee3bb97325 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -354,7 +354,11 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -372,6 +376,10 @@ resin {
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 3774f8e63416..7de54b2e497e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -349,7 +349,11 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -367,6 +371,10 @@ resin {
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 	firmware-name = "qcom/sm8150/adsp.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 778613d3410b..468e57f48ad0 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -793,6 +793,8 @@ gpu: gpu@2c00000 {
 
 			qcom,gmu = <&gmu>;
 
+			status = "disabled";
+
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
@@ -860,6 +862,8 @@ gmu: gmu@2c6a000 {
 
 			operating-points-v2 = <&gmu_opp_table>;
 
+			status = "disabled";
+
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -947,6 +951,8 @@ remoteproc_mpss: remoteproc@4080000 {
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
+			status = "disabled";
+
 			glink-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 				label = "modem";
-- 
2.30.2