[bug report] drm/msm/hdmi: HDMI 8996 PHY/PLL support

[Dan Carpenter <dan.carpenter@oracle.com>]

Hello Archit Taneja,

The patch e17afdceb4f2: "drm/msm/hdmi: HDMI 8996 PHY/PLL support"
from Feb 25, 2016, leads to the following
Smatch static checker warning:

   drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c:606 hdmi_8996_pll_prepare()
   info: return a literal instead of 'ret'

   drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c:622 hdmi_8996_pll_prepare()
   info: return a literal instead of 'ret'

drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
    592 static int hdmi_8996_pll_prepare(struct clk_hw *hw)
    593 {
    594         struct hdmi_pll_8996 *pll = hw_clk_to_pll(hw);
    595         struct hdmi_phy *phy = pll_get_phy(pll);
    596         int i, ret = 0;
    597 
    598         hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x1);
    599         udelay(100);
    600 
    601         hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x19);
    602         udelay(100);
    603 
    604         ret = hdmi_8996_pll_lock_status(pll);
    605         if (!ret)
--> 606                 return ret;

If this is not locked it returns success?  That's strange.

    607 
    608         for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++)
    609                 hdmi_tx_chan_write(pll, i,
    610                         REG_HDMI_PHY_QSERDES_TX_LX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN,
    611                         0x6F);
    612 
    613         /* Disable SSC */
    614         hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_PER1, 0x0);
    615         hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_PER2, 0x0);
    616         hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_STEP_SIZE1, 0x0);
    617         hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_STEP_SIZE2, 0x0);
    618         hdmi_pll_write(pll, REG_HDMI_PHY_QSERDES_COM_SSC_EN_CENTER, 0x2);
    619 
    620         ret = hdmi_8996_phy_ready_status(phy);
    621         if (!ret)
    622                 return ret;

If it's not ready then this returns success.  That seems very wrong.  I
would have expected -EIO or something.

    623 
    624         /* Restart the retiming buffer */
    625         hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x18);
    626         udelay(1);
    627         hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x19);
    628 
    629         return 0;
    630 }

regards,
dan carpenter