From: David Heidelberg <david@ixit.cz>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: ~okias/devicetree@lists.sr.ht, David Heidelberg <david@ixit.cz>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: qcom: fix thermal zones naming
Date: Wed, 20 Oct 2021 20:00:01 +0200 [thread overview]
Message-ID: <20211020180002.195467-1-david@ixit.cz> (raw)
Rename thermal zones according to dt-schema.
Fix warnings like:
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 8 ++++----
arch/arm/boot/dts/qcom-apq8084.dtsi | 8 ++++----
arch/arm/boot/dts/qcom-ipq8064.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/qcom-msm8974.dtsi | 12 ++++++------
4 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index dbc86a765be1..a6f83b590fd9 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -101,7 +101,7 @@ memory@0 {
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -122,7 +122,7 @@ cpu_crit0: trip1 {
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -143,7 +143,7 @@ cpu_crit1: trip1 {
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -164,7 +164,7 @@ cpu_crit2: trip1 {
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index bf6a03506b45..52240fc7a1a6 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -102,7 +102,7 @@ scm {
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -122,7 +122,7 @@ cpu_crit0: trip1 {
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -142,7 +142,7 @@ cpu_crit1: trip1 {
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -162,7 +162,7 @@ cpu_crit2: trip1 {
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4139d3817bd6..110113f3b8e2 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -49,7 +49,7 @@ L2: l2-cache {
};
thermal-zones {
- tsens_tz_sensor0 {
+ sensor0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 0>;
@@ -69,7 +69,7 @@ cpu-hot {
};
};
- tsens_tz_sensor1 {
+ sensor1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 1>;
@@ -89,7 +89,7 @@ cpu-hot {
};
};
- tsens_tz_sensor2 {
+ sensor2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 2>;
@@ -109,7 +109,7 @@ cpu-hot {
};
};
- tsens_tz_sensor3 {
+ sensor3-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 3>;
@@ -129,7 +129,7 @@ cpu-hot {
};
};
- tsens_tz_sensor4 {
+ sensor4-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 4>;
@@ -149,7 +149,7 @@ cpu-hot {
};
};
- tsens_tz_sensor5 {
+ sensor5-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 5>;
@@ -169,7 +169,7 @@ cpu-hot {
};
};
- tsens_tz_sensor6 {
+ sensor6-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 6>;
@@ -189,7 +189,7 @@ cpu-hot {
};
};
- tsens_tz_sensor7 {
+ sensor7-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 7>;
@@ -209,7 +209,7 @@ cpu-hot {
};
};
- tsens_tz_sensor8 {
+ sensor8-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 8>;
@@ -229,7 +229,7 @@ cpu-hot {
};
};
- tsens_tz_sensor9 {
+ sensor9-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 9>;
@@ -249,7 +249,7 @@ cpu-hot {
};
};
- tsens_tz_sensor10 {
+ sensor10-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens 10>;
@@ -751,7 +751,7 @@ tsens: thermal-sensor@900000 {
interrupt-names = "uplow";
#qcom,sensors = <11>;
- #thermal-sensor-cells = <1>;
+ #thermal-sensorcells = <1>;
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index fa8e3642b949..deaf7d288b2e 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -142,7 +142,7 @@ memory {
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -162,7 +162,7 @@ cpu_crit0: trip1 {
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -182,7 +182,7 @@ cpu_crit1: trip1 {
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -202,7 +202,7 @@ cpu_crit2: trip1 {
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -282,7 +282,7 @@ wlan_alert0: trip-point0 {
};
};
- gpu-thermal-top {
+ gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -297,7 +297,7 @@ gpu1_alert0: trip-point0 {
};
};
- gpu-thermal-bottom {
+ gpu-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
--
2.33.0
reply other threads:[~2021-10-20 18:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211020180002.195467-1-david@ixit.cz \
--to=david@ixit.cz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~okias/devicetree@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox