Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Jack Pham <jackp@codeaurora.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Felipe Balbi <balbi@kernel.org>,
	Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
	Wesley Cheng <wcheng@codeaurora.org>
Cc: linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 1/2] usb: dwc3: gadget: Skip resizing EP's TX FIFO if already resized
Date: Thu, 21 Oct 2021 11:00:15 -0700	[thread overview]
Message-ID: <20211021180015.GB2357@jackp-linux.qualcomm.com> (raw)
In-Reply-To: <20211021175807.23826-1-jackp@codeaurora.org>

Sorry, disregard this. Forgot to update the patch subject with V3.

Resending...

On Thu, Oct 21, 2021 at 10:58:06AM -0700, Jack Pham wrote:
> Some functions may dynamically enable and disable their endpoints
> regularly throughout their operation, particularly when Set Interface
> is employed to switch between Alternate Settings.  For instance the
> UAC2 function has its respective endpoints for playback & capture
> associated with AltSetting 1, in which case those endpoints would not
> get enabled until the host activates the AltSetting.  And they
> conversely become disabled when the interfaces' AltSetting 0 is
> chosen.
> 
> With the DWC3 FIFO resizing algorithm recently added, every
> usb_ep_enable() call results in a call to resize that EP's TXFIFO,
> but if the same endpoint is enabled again and again, this incorrectly
> leads to FIFO RAM allocation exhaustion as the mechanism did not
> account for the possibility that endpoints can be re-enabled many
> times.
> 
> Example log splat:
> 
> 	dwc3 a600000.dwc3: Fifosize(3717) > RAM size(3462) ep3in depth:217973127
> 	configfs-gadget gadget: u_audio_start_capture:521 Error!
> 	dwc3 a600000.dwc3: request 000000000be13e18 was not queued to ep3in
> 
> Add another bit DWC3_EP_TXFIFO_RESIZED to dep->flags to keep track of
> whether an EP had already been resized in the current configuration.
> If so, bail out of dwc3_gadget_resize_tx_fifos() to avoid the
> calculation error resulting from accumulating the EP's FIFO depth
> repeatedly.  This flag is retained across multiple ep_disable() and
> ep_enable() calls and is cleared when GTXFIFOSIZn is reset in
> dwc3_gadget_clear_tx_fifos() upon receiving the next Set Config.
> 
> Fixes: 9f607a309fbe9 ("usb: dwc3: Resize TX FIFOs to meet EP bursting requirements")
> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Signed-off-by: Jack Pham <jackp@codeaurora.org>
> ---
> v3: Fixed macro definition alignment; added Thinh's reviewed-by.
> 
> v2: Added explicit flag to dep->flags and check that instead of directly
>     reading the GTXFIFOSIZn register.
> 
>  drivers/usb/dwc3/core.h   | 1 +
>  drivers/usb/dwc3/gadget.c | 8 +++++++-
>  2 files changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 5612bfdf37da..0c100901a784 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -723,6 +723,7 @@ struct dwc3_ep {
>  #define DWC3_EP_FORCE_RESTART_STREAM	BIT(9)
>  #define DWC3_EP_FIRST_STREAM_PRIMED	BIT(10)
>  #define DWC3_EP_PENDING_CLEAR_STALL	BIT(11)
> +#define DWC3_EP_TXFIFO_RESIZED		BIT(12)
>  
>  	/* This last one is specific to EP0 */
>  #define DWC3_EP0_DIR_IN		BIT(31)
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 4519d06c9ca2..ed97e47d3261 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -702,6 +702,7 @@ void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
>  				   DWC31_GTXFIFOSIZ_TXFRAMNUM;
>  
>  		dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1), size);
> +		dep->flags &= ~DWC3_EP_TXFIFO_RESIZED;
>  	}
>  	dwc->num_ep_resized = 0;
>  }
> @@ -747,6 +748,10 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
>  	if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
>  		return 0;
>  
> +	/* bail if already resized */
> +	if (dep->flags & DWC3_EP_TXFIFO_RESIZED)
> +		return 0;
> +
>  	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
>  
>  	if ((dep->endpoint.maxburst > 1 &&
> @@ -807,6 +812,7 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
>  	}
>  
>  	dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size);
> +	dep->flags |= DWC3_EP_TXFIFO_RESIZED;
>  	dwc->num_ep_resized++;
>  
>  	return 0;
> @@ -995,7 +1001,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
>  
>  	dep->stream_capable = false;
>  	dep->type = 0;
> -	dep->flags = 0;
> +	dep->flags &= DWC3_EP_TXFIFO_RESIZED;
>  
>  	return 0;
>  }
> -- 
> 2.24.0
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

      reply	other threads:[~2021-10-21 18:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21 17:58 [PATCH 1/2] usb: dwc3: gadget: Skip resizing EP's TX FIFO if already resized Jack Pham
2021-10-21 18:00 ` Jack Pham [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211021180015.GB2357@jackp-linux.qualcomm.com \
    --to=jackp@codeaurora.org \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=wcheng@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox