From: Taniya Das <tdas@codeaurora.org>
To: "Stephen Boyd" <sboyd@kernel.org>,
"Michael Turquette " <mturquette@baylibre.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh@kernel.org, robh+dt@kernel.org,
Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v4 1/2] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280
Date: Wed, 26 Jan 2022 13:42:35 +0530 [thread overview]
Message-ID: <20220126081236.25255-2-tdas@codeaurora.org> (raw)
In-Reply-To: <20220126081236.25255-1-tdas@codeaurora.org>
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Also add clock ids for
LPASS core clocks and audio clock IDs for LPASS client to request for
the clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
.../clock/qcom,sc7280-lpasscorecc.yaml | 172 ++++++++++++++++++
.../clock/qcom,lpassaudiocc-sc7280.h | 43 +++++
.../clock/qcom,lpasscorecc-sc7280.h | 26 +++
3 files changed, 241 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
create mode 100644 include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 000000000000..bad9135489de
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm LPASS core and audio clock control module which supports the
+ clocks and power domains on SC7280.
+
+ See also:
+ - dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+ - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+ clocks: true
+
+ clock-names: true
+
+ compatible:
+ enum:
+ - qcom,sc7280-lpassaoncc
+ - qcom,sc7280-lpassaudiocc
+ - qcom,sc7280-lpasscorecc
+ - qcom,sc7280-lpasshm
+
+ power-domains:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sc7280-lpassaudiocc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: lpass_aon_cc_main_rcg_clk_src
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-lpassaoncc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board XO active only source
+ - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: bi_tcxo_ao
+ - const: iface
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-lpasshm
+ - qcom,sc7280-lpasscorecc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpass_audiocc: clock-controller@3300000 {
+ compatible = "qcom,sc7280-lpassaudiocc";
+ reg = <0x3300000 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+ clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpass_hm: clock-controller@3c00000 {
+ compatible = "qcom,sc7280-lpasshm";
+ reg = <0x3c00000 0x28>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpasscore: clock-controller@3900000 {
+ compatible = "qcom,sc7280-lpasscorecc";
+ reg = <0x3900000 0x50000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpass_aon: clock-controller@3380000 {
+ compatible = "qcom,sc7280-lpassaoncc";
+ reg = <0x3380000 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+ <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
diff --git a/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h b/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
new file mode 100644
index 000000000000..20ef2ea673f3
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H
+#define _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H
+
+/* LPASS_AUDIO_CC clocks */
+#define LPASS_AUDIO_CC_PLL 0
+#define LPASS_AUDIO_CC_PLL_OUT_AUX2 1
+#define LPASS_AUDIO_CC_PLL_OUT_AUX2_DIV_CLK_SRC 2
+#define LPASS_AUDIO_CC_PLL_OUT_MAIN_DIV_CLK_SRC 3
+#define LPASS_AUDIO_CC_CDIV_RX_MCLK_DIV_CLK_SRC 4
+#define LPASS_AUDIO_CC_CODEC_MEM0_CLK 5
+#define LPASS_AUDIO_CC_CODEC_MEM1_CLK 6
+#define LPASS_AUDIO_CC_CODEC_MEM2_CLK 7
+#define LPASS_AUDIO_CC_CODEC_MEM_CLK 8
+#define LPASS_AUDIO_CC_EXT_MCLK0_CLK 9
+#define LPASS_AUDIO_CC_EXT_MCLK0_CLK_SRC 10
+#define LPASS_AUDIO_CC_EXT_MCLK1_CLK 11
+#define LPASS_AUDIO_CC_EXT_MCLK1_CLK_SRC 12
+#define LPASS_AUDIO_CC_RX_MCLK_2X_CLK 13
+#define LPASS_AUDIO_CC_RX_MCLK_CLK 14
+#define LPASS_AUDIO_CC_RX_MCLK_CLK_SRC 15
+
+/* LPASS_AON_CC clocks */
+#define LPASS_AON_CC_PLL 0
+#define LPASS_AON_CC_PLL_OUT_EVEN 1
+#define LPASS_AON_CC_PLL_OUT_MAIN_CDIV_DIV_CLK_SRC 2
+#define LPASS_AON_CC_PLL_OUT_ODD 3
+#define LPASS_AON_CC_AUDIO_HM_H_CLK 4
+#define LPASS_AON_CC_CDIV_TX_MCLK_DIV_CLK_SRC 5
+#define LPASS_AON_CC_MAIN_RCG_CLK_SRC 6
+#define LPASS_AON_CC_TX_MCLK_2X_CLK 7
+#define LPASS_AON_CC_TX_MCLK_CLK 8
+#define LPASS_AON_CC_TX_MCLK_RCG_CLK_SRC 9
+#define LPASS_AON_CC_VA_MEM0_CLK 10
+
+/* LPASS_AON_CC power domains */
+#define LPASS_AON_CC_LPASS_AUDIO_HM_GDSC 0
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
new file mode 100644
index 000000000000..28ed2a07aacc
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H
+#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H
+
+/* LPASS_CORE_CC clocks */
+#define LPASS_CORE_CC_DIG_PLL 0
+#define LPASS_CORE_CC_DIG_PLL_OUT_MAIN_DIV_CLK_SRC 1
+#define LPASS_CORE_CC_DIG_PLL_OUT_ODD 2
+#define LPASS_CORE_CC_CORE_CLK 3
+#define LPASS_CORE_CC_CORE_CLK_SRC 4
+#define LPASS_CORE_CC_EXT_IF0_CLK_SRC 5
+#define LPASS_CORE_CC_EXT_IF0_IBIT_CLK 6
+#define LPASS_CORE_CC_EXT_IF1_CLK_SRC 7
+#define LPASS_CORE_CC_EXT_IF1_IBIT_CLK 8
+#define LPASS_CORE_CC_LPM_CORE_CLK 9
+#define LPASS_CORE_CC_LPM_MEM0_CORE_CLK 10
+#define LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK 11
+
+/* LPASS_CORE_CC power domains */
+#define LPASS_CORE_CC_LPASS_CORE_HM_GDSC 0
+
+#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
next prev parent reply other threads:[~2022-01-26 8:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 8:12 [PATCH v4 0/2] Add support for LPASS Core and Audio Clock for SC7280 Taniya Das
2022-01-26 8:12 ` Taniya Das [this message]
2022-02-04 23:17 ` [PATCH v4 1/2] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 Rob Herring
2022-02-17 22:40 ` Stephen Boyd
2022-01-26 8:12 ` [PATCH v4 2/2] clk: qcom: lpass: Add support for LPASS clock controller for SC7280 Taniya Das
2022-02-17 22:42 ` Stephen Boyd
2022-04-13 14:30 ` [PATCH v4 0/2] Add support for LPASS Core and Audio Clock " patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126081236.25255-2-tdas@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).