From: Vinod Koul <vkoul@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v4 08/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
Date: Thu, 10 Feb 2022 12:07:34 +0530 [thread overview]
Message-ID: <20220210063739.233634-9-vkoul@kernel.org> (raw)
In-Reply-To: <20220210063739.233634-1-vkoul@kernel.org>
We cannot enable mode_3d when we are using the DSC. So pass
configuration to detect DSC is enabled and not enable mode_3d
when we are using DSC
We add a helper dpu_encoder_helper_get_dsc() to detect dsc
enabled and pass this to .setup_intf_cfg()
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 4 ++++
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 4 ++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 ++++++-
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 34a6940d12c5..ed37a4c21596 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -70,6 +70,10 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
intf_cfg.stream_sel = cmd_enc->stream_sel;
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+ intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
+ if (intf_cfg.dsc)
+ intf_cfg.mode_3d = 0;
+
ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index ddd9d89cd456..218009855fca 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -284,6 +284,10 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_VID;
intf_cfg.stream_sel = 0; /* Don't care value for video mode */
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+ intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
+ if (intf_cfg.dsc)
+ intf_cfg.mode_3d = 0;
+
if (phys_enc->hw_pp->merge_3d)
intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 49659165cea8..6d5268b7da90 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -536,7 +536,12 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
intf_cfg |= (cfg->intf & 0xF) << 4;
- if (cfg->mode_3d) {
+ /* In DSC we can't set merge, so check for dsc and complain */
+ if (cfg->mode_3d && cfg->dsc)
+ pr_err("DPU1: DSC and Merge 3D both are set!! it may not work\n");
+
+ /* set merge only when dsc is not set */
+ if (cfg->mode_3d && !cfg->dsc) {
intf_cfg |= BIT(19);
intf_cfg |= (cfg->mode_3d - 0x1) << 20;
}
--
2.31.1
next prev parent reply other threads:[~2022-02-10 6:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 6:37 [PATCH v4 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
2022-02-10 6:37 ` [PATCH v4 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
2022-02-10 6:37 ` [PATCH v4 02/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
2022-02-10 6:37 ` [PATCH v4 03/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2022-02-10 6:37 ` [PATCH v4 04/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2022-02-10 6:37 ` [PATCH v4 05/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
2022-02-10 6:37 ` [PATCH v4 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
2022-02-10 6:37 ` [PATCH v4 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
2022-02-10 6:37 ` Vinod Koul [this message]
2022-02-10 6:37 ` [PATCH v4 09/13] drm/msm: Add missing structure documentation Vinod Koul
2022-02-10 6:37 ` [PATCH v4 10/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
2022-02-10 6:37 ` [PATCH v4 11/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
2022-02-10 10:15 ` Dmitry Baryshkov
2022-02-10 6:37 ` [PATCH v4 12/13] drm/msm/dsi: add mode valid callback for dsi_mgr Vinod Koul
2022-02-10 6:37 ` [PATCH v4 13/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220210063739.233634-9-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox