Re: [PATCH v2 1/1] bus: mhi: pci_generic: add Telit FN980 v1 hardware revision

[Manivannan Sadhasivam <mani@kernel.org>]

On Wed, Apr 27, 2022 at 09:26:48AM +0200, Daniele Palmas wrote:
> Add Telit FN980 v1 hardware revision:
> 
> 01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
>         Subsystem: Device [1c5d:2000]
> 
> Signed-off-by: Daniele Palmas <dnlplm@gmail.com>

Applied to mhi-next!

Thanks,
Mani

> ---
> V2: rebased after mhi_pci_id_table reordering
> ---
>  drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 8858f3bf4f04..8e453b74e6cd 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -446,6 +446,41 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = {
>  	.sideband_wake = false,
>  };
>  
> +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = {
> +	MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
> +	MHI_CHANNEL_CONFIG_UL(20, "IPCR", 16, 0),
> +	MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 16, 0),
> +	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 1),
> +	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 2),
> +};
> +
> +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = {
> +	MHI_EVENT_CONFIG_CTRL(0, 128),
> +	MHI_EVENT_CONFIG_HW_DATA(1, 1024, 100),
> +	MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
> +};
> +
> +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = {
> +	.max_channels = 128,
> +	.timeout_ms = 20000,
> +	.num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels),
> +	.ch_cfg = mhi_telit_fn980_hw_v1_channels,
> +	.num_events = ARRAY_SIZE(mhi_telit_fn980_hw_v1_events),
> +	.event_cfg = mhi_telit_fn980_hw_v1_events,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = {
> +	.name = "telit-fn980-hwv1",
> +	.fw = "qcom/sdx55m/sbl1.mbn",
> +	.edl = "qcom/sdx55m/edl.mbn",
> +	.config = &modem_telit_fn980_hw_v1_config,
> +	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> +	.dma_data_width = 32,
> +	.mru_default = 32768,
> +	.sideband_wake = false,
> +};
> +
>  /* Keep the list sorted based on the PID. New VID should be added as the last entry */
>  static const struct pci_device_id mhi_pci_id_table[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
> @@ -453,6 +488,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {
>  	/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
>  	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
>  		.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
> +	/* Telit FN980 hardware revision v1 */
> +	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000),
> +		.driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
>  		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
> -- 
> 2.32.0
>