From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Jingoo Han <jingoohan1@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v5 0/7] PCI: qcom: Fix higher MSI vectors handling
Date: Sat, 30 Apr 2022 00:42:43 +0300 [thread overview]
Message-ID: <20220429214250.3728510-1-dmitry.baryshkov@linaro.org> (raw)
I have replied with my Tested-by to the patch at [2], which has landed
in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom:
Add support for handling MSIs from 8 endpoints"). However lately I
noticed that during the tests I still had 'pcie_pme=nomsi', so the
device was not forced to use higher MSI vectors.
After removing this option I noticed that hight MSI vectors are not
delivered on tested platforms. After additional research I stumbled upon
a patch in msm-4.14 ([1]), which describes that each group of MSI
vectors is mapped to the separate interrupt. Implement corresponding
mapping.
Patchseries dependecies: [2] (landed in pci-next) and [3] (for the
schema change).
Since we can not expect that other platforms will use multi-IRQ scheme
for MSI mapping (e.g. iMX and Tegra map all 256 MSI interrupts to single
IRQ), it's support is implemented directly in pcie-qcom rather than in
the core driver.
Changes since v4:
- Fix the minItems/maxItems properties in the YAML schema
Changes since v3:
- Reimplement MSI handling scheme in the Qualcomm host controller
driver.
Changes since v2:
- Fix and rephrase commit message for patch 2.
Changes since v1:
- Split a huge patch into three patches as suggested by Bjorn Helgaas
- snps,dw-pcie removal is now part of [3]
[1] https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/commit/671a3d5f129f4bfe477152292ada2194c8440d22
[2] https://lore.kernel.org/linux-arm-msm/20211214101319.25258-1-manivannan.sadhasivam@linaro.org/
[3] https://lore.kernel.org/linux-arm-msm/20220422211002.2012070-1-dmitry.baryshkov@linaro.org/
Dmitry Baryshkov (7):
PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8
endpoints"
PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
PCI: dwc: Add msi_host_deinit callback
PCI: dwc: Export several functions useful for MSI implentations
PCI: qcom: Handle MSI IRQs properly
dt-bindings: PCI: qcom: Support additional MSI interrupts
arm64: dts: qcom: sm8250: provide additional MSI interrupts
.../devicetree/bindings/pci/qcom,pcie.yaml | 45 +++++-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 +-
.../pci/controller/dwc/pcie-designware-host.c | 72 +++++----
drivers/pci/controller/dwc/pcie-designware.h | 12 ++
drivers/pci/controller/dwc/pcie-qcom.c | 138 +++++++++++++++++-
5 files changed, 246 insertions(+), 32 deletions(-)
--
2.35.1
next reply other threads:[~2022-04-29 21:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-29 21:42 Dmitry Baryshkov [this message]
2022-04-29 21:42 ` [PATCH v5 1/7] PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8 endpoints" Dmitry Baryshkov
2022-04-29 22:07 ` Bjorn Helgaas
2022-04-29 22:39 ` Dmitry Baryshkov
2022-04-29 21:42 ` [PATCH v5 2/7] PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi() Dmitry Baryshkov
2022-04-29 21:42 ` [PATCH v5 3/7] PCI: dwc: Add msi_host_deinit callback Dmitry Baryshkov
2022-04-29 21:42 ` [PATCH v5 4/7] PCI: dwc: Export several functions useful for MSI implentations Dmitry Baryshkov
2022-04-29 21:42 ` [PATCH v5 5/7] PCI: qcom: Handle MSI IRQs properly Dmitry Baryshkov
2022-04-29 22:47 ` Bjorn Helgaas
2022-05-05 9:01 ` Dmitry Baryshkov
2022-04-29 21:42 ` [PATCH v5 6/7] dt-bindings: PCI: qcom: Support additional MSI interrupts Dmitry Baryshkov
2022-04-30 14:54 ` Krzysztof Kozlowski
2022-04-29 21:42 ` [PATCH v5 7/7] arm64: dts: qcom: sm8250: provide " Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220429214250.3728510-1-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=svarbanov@mm-sol.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).