[PATCH 1/2] phy: qcom-qmp: fix msm8996 PCIe PHY support

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Replace init/exit ops with power_on/power_off which should be used for
the PCIe PHYs to fix PHY initialization.

Fixes: f575ac2d64e7 ("phy: qcom-qmp-pcie-msm8996: drop support for non-PCIe PHY types")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index 48ea1de81d7c..21103c41ba08 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -854,8 +854,8 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 }
 
 static const struct phy_ops qcom_qmp_phy_pcie_msm8996_ops = {
-	.init		= qcom_qmp_phy_pcie_msm8996_enable,
-	.exit		= qcom_qmp_phy_pcie_msm8996_disable,
+	.power_on	= qcom_qmp_phy_pcie_msm8996_enable,
+	.power_off	= qcom_qmp_phy_pcie_msm8996_disable,
 	.set_mode	= qcom_qmp_phy_pcie_msm8996_set_mode,
 	.owner		= THIS_MODULE,
 };
-- 
2.35.1