* [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices @ 2022-06-26 15:12 Stefan Hansson 2022-06-26 15:12 ` [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 Stefan Hansson 2022-06-26 16:34 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices Krzysztof Kozlowski 0 siblings, 2 replies; 5+ messages in thread From: Stefan Hansson @ 2022-06-26 15:12 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Stephen Boyd, linux-arm-msm, devicetree, linux-kernel Cc: ~postmarketos/upstreaming, phone-devel, Stefan Hansson Add binding documentation for the LG G7 and LG V35 smartphones which are based on Snapdragon 845 (sdm845). Changes since v2: - Rebased on top of https://lore.kernel.org/all/20220521164550.91115-7-krzysztof.kozlowski@linaro.org/ Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index cf025c64d494..bc16f58082be 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -282,6 +282,8 @@ properties: - items: - enum: - lenovo,yoga-c630 + - lg,judyln + - lg,judyp - oneplus,enchilada - oneplus,fajita - qcom,sdm845-mtp -- 2.36.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 2022-06-26 15:12 [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices Stefan Hansson @ 2022-06-26 15:12 ` Stefan Hansson 2022-06-26 16:37 ` Krzysztof Kozlowski 2022-06-26 16:34 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices Krzysztof Kozlowski 1 sibling, 1 reply; 5+ messages in thread From: Stefan Hansson @ 2022-06-26 15:12 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Stephen Boyd, linux-arm-msm, devicetree, linux-kernel Cc: ~postmarketos/upstreaming, phone-devel, Anton Bambura, Stefan Hansson, Gregari Ivanov From: Anton Bambura <jenneron@protonmail.com> Adds initial support for the LG G7 (judyln) and LG V35 (judyp) phones. Currently supported features: - Display via simplefb (panel driver is WIP) - Keys - Micro SD card - Modem (not tested much, but initialises) - UFS (crashes during intensive workloads, may need quirks) - USB in peripheral mode Notable missing features: - Enabling WiFi causes a remoteproc crash, so it's disabled here. Needs to be debugged - ideas welcome! Changes since v1: - Enabled GPU - Changed some node names - Moved framebuffer node from common dtsi Changes since v2: - Made pm8998-smps4 regulator name generic Signed-off-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Tested-by: Gregari Ivanov <llamashere@posteo.de> --- arch/arm64/boot/dts/qcom/Makefile | 2 + .../arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 614 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 68 ++ arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts | 44 ++ 4 files changed, 728 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2f8aec2cc6db..3494abb367f4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -100,6 +100,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi new file mode 100644 index 000000000000..20f275f8694d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 / V35 (judyln / judyp) common device tree + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mba_region; +/delete-node/ &mpss_region; +/delete-node/ &qseecom_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; + +/ { + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qseecom_mem: memory@b2000000 { + reg = <0 0xb2000000 0 0x1800000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x8900000>; + no-map; + }; + + venus_mem: memory@96d00000 { + reg = <0 0x96d00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@97200000 { + reg = <0 0x97200000 0 0x800000>; + no-map; + }; + + mba_region: memory@97a00000 { + reg = <0 0x97a00000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@97c00000 { + reg = <0 0x97c00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@99000000 { + reg = <0 0x99000000 0 0x100000>; + no-map; + }; + + /* Framebuffer region */ + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* rmtfs lower guard */ + memory@f0800000 { + reg = <0 0xf0800000 0 0x1000>; + no-map; + }; + + rmtfs_mem: memory@f0801000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf0801000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* rmtfs upper guard */ + memory@f0a01000 { + reg = <0 0xf0a01000 0 0x1000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + label = "GPIO Buttons"; + + key-vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; +}; + +&dispcc { + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + }; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&mss_pil { + status = "okay"; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; +}; + +/* + * UFS works partially and only with clk_ignore_unused. + * Sometimes it crashes with I/O errors. + */ +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: these devices have usb id pin */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&tlmm { + gpio-reserved-ranges = <28 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-pins { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts new file mode 100644 index 000000000000..7d967a104b3e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 (judyln) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG G7 ThinQ"; + compatible = "lg,judyln", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>; + width = <1440>; + height = <3120>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + lab-supply = <&lab>; + ibb-supply = <&ibb>; + }; + }; + + /* Additional ThinQ key */ + gpio-keys { + pinctrl-0 = <&vol_up_pin_a &thinq_key_default>; + + key-thinq { + label = "ThinQ"; + linux,code = <KEY_ASSISTANT>; + interrupt-parent = <&tlmm>; + interrupts = <89 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyln/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn"; +}; + +&tlmm { + thinq_key_default: thinq-key-default { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts new file mode 100644 index 000000000000..d17d4d4d5609 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG V35 (judyp) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG V35 ThinQ"; + compatible = "lg,judyp", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>; + width = <1440>; + height = <2880>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyp/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn"; +}; -- 2.36.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 2022-06-26 15:12 ` [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 Stefan Hansson @ 2022-06-26 16:37 ` Krzysztof Kozlowski 0 siblings, 0 replies; 5+ messages in thread From: Krzysztof Kozlowski @ 2022-06-26 16:37 UTC (permalink / raw) To: Stefan Hansson, Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Stephen Boyd, linux-arm-msm, devicetree, linux-kernel Cc: ~postmarketos/upstreaming, phone-devel, Anton Bambura, Gregari Ivanov On 26/06/2022 17:12, Stefan Hansson wrote: > From: Anton Bambura <jenneron@protonmail.com> > > Adds initial support for the LG G7 (judyln) and > LG V35 (judyp) phones. > > Currently supported features: > > - Display via simplefb (panel driver is WIP) > - Keys > - Micro SD card > - Modem (not tested much, but initialises) > - UFS (crashes during intensive workloads, may need quirks) > - USB in peripheral mode > > Notable missing features: > > - Enabling WiFi causes a remoteproc crash, so it's disabled here. > Needs to be debugged - ideas welcome! > > Changes since v1: Changelog goes after --- Rest looks good. > > - Enabled GPU > - Changed some node names > - Moved framebuffer node from common dtsi > > Changes since v2: > > - Made pm8998-smps4 regulator name generic > > Signed-off-by: Anton Bambura <jenneron@protonmail.com> > Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> > Tested-by: Gregari Ivanov <llamashere@posteo.de> > --- Best regards, Krzysztof ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices 2022-06-26 15:12 [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices Stefan Hansson 2022-06-26 15:12 ` [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 Stefan Hansson @ 2022-06-26 16:34 ` Krzysztof Kozlowski 1 sibling, 0 replies; 5+ messages in thread From: Krzysztof Kozlowski @ 2022-06-26 16:34 UTC (permalink / raw) To: Stefan Hansson, Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Stephen Boyd, linux-arm-msm, devicetree, linux-kernel Cc: ~postmarketos/upstreaming, phone-devel On 26/06/2022 17:12, Stefan Hansson wrote: > Add binding documentation for the LG G7 and LG V35 smartphones > which are based on Snapdragon 845 (sdm845). > > Changes since v2: This goes after --- > > - Rebased on top of > https://lore.kernel.org/all/20220521164550.91115-7-krzysztof.kozlowski@linaro.org/ > > Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ > 1 file changed, 2 insertions(+) Best regards, Krzysztof ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices @ 2022-06-26 16:43 Stefan Hansson 2022-06-26 16:43 ` [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 Stefan Hansson 0 siblings, 1 reply; 5+ messages in thread From: Stefan Hansson @ 2022-06-26 16:43 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Stephen Boyd, linux-arm-msm, devicetree, linux-kernel Cc: ~postmarketos/upstreaming, phone-devel, Stefan Hansson Add binding documentation for the LG G7 and LG V35 smartphones which are based on Snapdragon 845 (sdm845). Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> --- Changes since v3: - Fixed changelog location Changes since v2: - Rebased on top of https://lore.kernel.org/all/20220521164550.91115-7-krzysztof.kozlowski@linaro.org/ Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index cf025c64d494..bc16f58082be 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -282,6 +282,8 @@ properties: - items: - enum: - lenovo,yoga-c630 + - lg,judyln + - lg,judyp - oneplus,enchilada - oneplus,fajita - qcom,sdm845-mtp -- 2.36.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 2022-06-26 16:43 Stefan Hansson @ 2022-06-26 16:43 ` Stefan Hansson 0 siblings, 0 replies; 5+ messages in thread From: Stefan Hansson @ 2022-06-26 16:43 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Stephen Boyd, linux-arm-msm, devicetree, linux-kernel Cc: ~postmarketos/upstreaming, phone-devel, Anton Bambura, Stefan Hansson, Gregari Ivanov From: Anton Bambura <jenneron@protonmail.com> Adds initial support for the LG G7 (judyln) and LG V35 (judyp) phones. Currently supported features: - Display via simplefb (panel driver is WIP) - Keys - Micro SD card - Modem (not tested much, but initialises) - UFS (crashes during intensive workloads, may need quirks) - USB in peripheral mode Notable missing features: - Enabling WiFi causes a remoteproc crash, so it's disabled here. Needs to be debugged - ideas welcome! Signed-off-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Tested-by: Gregari Ivanov <llamashere@posteo.de> --- Changes since v3: - Fixed changelog location Changes since v2: - Made pm8998-smps4 regulator name generic Changes since v1: - Enabled GPU - Changed some node names - Moved framebuffer node from common dtsi arch/arm64/boot/dts/qcom/Makefile | 2 + .../arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 614 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 68 ++ arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts | 44 ++ 4 files changed, 728 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2f8aec2cc6db..3494abb367f4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -100,6 +100,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi new file mode 100644 index 000000000000..20f275f8694d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 / V35 (judyln / judyp) common device tree + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mba_region; +/delete-node/ &mpss_region; +/delete-node/ &qseecom_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; + +/ { + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qseecom_mem: memory@b2000000 { + reg = <0 0xb2000000 0 0x1800000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x8900000>; + no-map; + }; + + venus_mem: memory@96d00000 { + reg = <0 0x96d00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@97200000 { + reg = <0 0x97200000 0 0x800000>; + no-map; + }; + + mba_region: memory@97a00000 { + reg = <0 0x97a00000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@97c00000 { + reg = <0 0x97c00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@99000000 { + reg = <0 0x99000000 0 0x100000>; + no-map; + }; + + /* Framebuffer region */ + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* rmtfs lower guard */ + memory@f0800000 { + reg = <0 0xf0800000 0 0x1000>; + no-map; + }; + + rmtfs_mem: memory@f0801000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf0801000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* rmtfs upper guard */ + memory@f0a01000 { + reg = <0 0xf0a01000 0 0x1000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + label = "GPIO Buttons"; + + key-vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; +}; + +&dispcc { + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + }; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&mss_pil { + status = "okay"; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; +}; + +/* + * UFS works partially and only with clk_ignore_unused. + * Sometimes it crashes with I/O errors. + */ +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: these devices have usb id pin */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&tlmm { + gpio-reserved-ranges = <28 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-pins { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts new file mode 100644 index 000000000000..7d967a104b3e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 (judyln) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG G7 ThinQ"; + compatible = "lg,judyln", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>; + width = <1440>; + height = <3120>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + lab-supply = <&lab>; + ibb-supply = <&ibb>; + }; + }; + + /* Additional ThinQ key */ + gpio-keys { + pinctrl-0 = <&vol_up_pin_a &thinq_key_default>; + + key-thinq { + label = "ThinQ"; + linux,code = <KEY_ASSISTANT>; + interrupt-parent = <&tlmm>; + interrupts = <89 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyln/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn"; +}; + +&tlmm { + thinq_key_default: thinq-key-default { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts new file mode 100644 index 000000000000..d17d4d4d5609 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG V35 (judyp) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG V35 ThinQ"; + compatible = "lg,judyp", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>; + width = <1440>; + height = <2880>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyp/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn"; +}; -- 2.36.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-06-26 16:44 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-06-26 15:12 [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices Stefan Hansson 2022-06-26 15:12 ` [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 Stefan Hansson 2022-06-26 16:37 ` Krzysztof Kozlowski 2022-06-26 16:34 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices Krzysztof Kozlowski -- strict thread matches above, loose matches on Subject: below -- 2022-06-26 16:43 Stefan Hansson 2022-06-26 16:43 ` [PATCH v3 2/2] arm64: dts: qcom: add device tree for LG G7 and LG V35 Stefan Hansson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).