[PATCH 2/2] usb: dwc3: qcom: clean up icc init

[Johan Hovold <johan+linaro@kernel.org>]

Clean up the interconnect-initialisation helper by increasing
indentation of (or merging) continuation lines and adding brackets
around multi-line blocks in order to improve readability.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 196efa9f2545..f2ff4fe1490a 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -253,7 +253,7 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
 	qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
 	if (IS_ERR(qcom->icc_path_ddr)) {
 		dev_err(dev, "failed to get usb-ddr path: %ld\n",
-			PTR_ERR(qcom->icc_path_ddr));
+				PTR_ERR(qcom->icc_path_ddr));
 		return PTR_ERR(qcom->icc_path_ddr);
 	}
 
@@ -265,20 +265,19 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
 	}
 
 	max_speed = usb_get_maximum_speed(&qcom->dwc3->dev);
-	if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN)
+	if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) {
 		ret = icc_set_bw(qcom->icc_path_ddr,
-			USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
-	else
+				USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
+	} else {
 		ret = icc_set_bw(qcom->icc_path_ddr,
-			USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
-
+				USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
+	}
 	if (ret) {
 		dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
 		return ret;
 	}
 
-	ret = icc_set_bw(qcom->icc_path_apps,
-		APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
+	ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
 	if (ret) {
 		dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
 		return ret;
-- 
2.35.1