linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: daniel.lezcano@linaro.org, rafael@kernel.org
Cc: rui.zhang@intel.com, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Thara Gopinath <thara.gopinath@linaro.org>,
	linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT)
Subject: [PATCH v1 11/26] thermal/drivers/qcom: Use generic thermal_zone_get_trip() function
Date: Fri,  5 Aug 2022 16:57:14 +0200	[thread overview]
Message-ID: <20220805145729.2491611-12-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20220805145729.2491611-1-daniel.lezcano@linaro.org>

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 +++++++++------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index be785ab37e53..127e8c90211c 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -263,17 +263,17 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
 	return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
 }
 
-static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
+static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip_id, int temp)
 {
 	struct qpnp_tm_chip *chip = tz->devdata;
-	const struct thermal_trip *trip_points;
+	struct thermal_trip trip;
 	int ret;
 
-	trip_points = of_thermal_get_trip_points(chip->tz_dev);
-	if (!trip_points)
-		return -EINVAL;
+	ret = thermal_zone_get_trip(chip->tz_dev, trip_id, &trip);
+	if (ret)
+		return ret;
 
-	if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
+	if (trip.type != THERMAL_TRIP_CRITICAL)
 		return 0;
 
 	mutex_lock(&chip->lock);
@@ -299,22 +299,17 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
 
 static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
 {
-	int ntrips;
-	const struct thermal_trip *trips;
-	int i;
-
-	ntrips = of_thermal_get_ntrips(chip->tz_dev);
-	if (ntrips <= 0)
-		return THERMAL_TEMP_INVALID;
-
-	trips = of_thermal_get_trip_points(chip->tz_dev);
-	if (!trips)
-		return THERMAL_TEMP_INVALID;
-
-	for (i = 0; i < ntrips; i++) {
-		if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
-		    trips[i].type == THERMAL_TRIP_CRITICAL)
-			return trips[i].temperature;
+	struct thermal_trip trip;
+	int i, ret;
+
+	for (i = 0; i < thermal_zone_get_num_trips(chip->tz_dev); i++) {
+
+		ret = thermal_zone_get_trip(chip->tz_dev, i, &trip);
+		if (ret)
+			continue;
+
+		if (trip.type == THERMAL_TRIP_CRITICAL)
+			return trip.temperature;
 	}
 
 	return THERMAL_TEMP_INVALID;
-- 
2.25.1


  reply	other threads:[~2022-08-05 14:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-05 14:57 [PATCH v1 00/26] Rework the trip points creation Daniel Lezcano
2022-08-05 14:57 ` Daniel Lezcano [this message]
2022-08-06  6:26   ` [PATCH v1 11/26] thermal/drivers/qcom: Use generic thermal_zone_get_trip() function Amit Kucheria

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220805145729.2491611-12-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=agross@kernel.org \
    --cc=amitk@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=thara.gopinath@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).