[PATCH] phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

According to the kernel 4.4 sources from NHSS.QSDK.9.0.2 and according
to hardware docs, the PHY registers layout used for IPQ8074 USB3 PHY is
incorrect. This platform uses offset 0x174 for the PCS_STATUS register,
0xd8 for PCS_AUTONOMOUS_MODE_CTRL, etc.

Correct the PHY registers layout.

Fixes: 94a407cc17a4 ("phy: qcom-qmp: create copies of QMP PHY driver")
Fixes: 507156f5a99f ("phy: qcom-qmp: Add USB QMP PHY support for IPQ8074")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index b84c0d4b5754..c3e7a860582b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1616,7 +1616,7 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= usb3phy_regs_layout,
+	.regs			= qmp_v3_usb3phy_regs_layout,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-- 
2.35.1