[PATCH v3 03/11] phy: qcom-qmp-pcie: drop unused common-block registers

[Johan Hovold <johan+linaro@kernel.org>]

Drop the common-block register defines that are unused since the QMP
driver split.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index e0408c423ac6..bdbd18b89a8c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -78,11 +78,6 @@ struct qmp_phy_init_tbl {
 
 /* set of registers with offsets different per-PHY */
 enum qphy_reg_layout {
-	/* Common block control registers */
-	QPHY_COM_SW_RESET,
-	QPHY_COM_POWER_DOWN_CONTROL,
-	QPHY_COM_START_CONTROL,
-	QPHY_COM_PCS_READY_STATUS,
 	/* PCS registers */
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
@@ -100,10 +95,6 @@ static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
 };
 
 static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_COM_SW_RESET]		= 0x400,
-	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
-	[QPHY_COM_START_CONTROL]	= 0x408,
-	[QPHY_COM_PCS_READY_STATUS]	= 0x448,
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_STATUS]		= 0x174,
-- 
2.37.3