Re: [PATCH 07/10] dt-bindings: phy: qcom,qmp-ufs: rename current bindings

Krzysztof Kozlowski
2022-10-28T02:09:59Z

On 24/10/2022 05:00, Johan Hovold wrote:
> The current QMP UFS PHY bindings are based on the original MSM8996 PCIe
> PHY binding which provided multiple PHYs per IP block and these in turn
> were described by child nodes.
>
> The QMP UFS PHY block only provide a single PHY and the remnant child
> node does not really reflect the hardware.
>
> The original MSM8996 binding also ended up describing the individual
> register blocks as belonging to either the wrapper node or the PHY child
> nodes.
>
> This is an unnecessary level of detail which has lead to problems when
> later IP blocks using different register layouts have been forced to fit
> the original mould rather than updating the binding. The bindings are
> arguable also incomplete as they only the describe register blocks used
> by the current Linux drivers.
>
> In preparation for adding new bindings for SC8280XP which further
> bindings can be based on, rename the current bindings after MSM8996 and
> add a reference to the SC8280XP bindings.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof