[PATCH v4 06/16] phy: qcom-qmp-pcie: rename PHY ops structure

[Johan Hovold <johan+linaro@kernel.org>]

Rename the PHY operation structure so that it has a "phy_ops" suffix and
move it next to the implementation.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index e30cbc94cbf6..bd946438e3c3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2037,6 +2037,13 @@ static int qmp_pcie_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 	return 0;
 }
 
+static const struct phy_ops qmp_pcie_phy_ops = {
+	.power_on	= qmp_pcie_enable,
+	.power_off	= qmp_pcie_disable,
+	.set_mode	= qmp_pcie_set_mode,
+	.owner		= THIS_MODULE,
+};
+
 static int qmp_pcie_vreg_init(struct qmp_pcie *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2160,13 +2167,6 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
 	return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
 }
 
-static const struct phy_ops qmp_pcie_ops = {
-	.power_on	= qmp_pcie_enable,
-	.power_off	= qmp_pcie_disable,
-	.set_mode	= qmp_pcie_set_mode,
-	.owner		= THIS_MODULE,
-};
-
 static int qmp_pcie_create(struct qmp_pcie *qmp, struct device_node *np)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2229,7 +2229,7 @@ static int qmp_pcie_create(struct qmp_pcie *qmp, struct device_node *np)
 				     "failed to get pipe clock\n");
 	}
 
-	generic_phy = devm_phy_create(dev, np, &qmp_pcie_ops);
+	generic_phy = devm_phy_create(dev, np, &qmp_pcie_phy_ops);
 	if (IS_ERR(generic_phy)) {
 		ret = PTR_ERR(generic_phy);
 		dev_err(dev, "failed to create PHY: %d\n", ret);
-- 
2.37.3