[PATCH v2 02/13] drm/bridge: lt9611: fix HPD reenablement

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

The driver will reset the bridge in the atomic_pre_enable(). However
this will also drop the HPD interrupt state. Instead of resetting the
bridge, properly wake it up. This fixes the HPD interrupt delivery after
the disable/enable cycle.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/bridge/lontium-lt9611.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 2714184cc53f..58f39b279217 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -856,12 +856,18 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,
 static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)
 {
 	struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+	static const struct reg_sequence reg_cfg[] = {
+		{ 0x8102, 0x12 },
+		{ 0x8123, 0x40 },
+		{ 0x8130, 0xea },
+		{ 0x8011, 0xfa },
+	};
 
 	if (!lt9611->sleep)
 		return;
 
-	lt9611_reset(lt9611);
-	regmap_write(lt9611->regmap, 0x80ee, 0x01);
+	regmap_multi_reg_write(lt9611->regmap,
+			       reg_cfg, ARRAY_SIZE(reg_cfg));
 
 	lt9611->sleep = false;
 }
-- 
2.39.0