From: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s
Date: Mon, 16 Jan 2023 19:57:13 -0600 [thread overview]
Message-ID: <20230117015713.j62qymja6bdbgxiu@builder.lan> (raw)
In-Reply-To: <c37bdea2-2154-975b-4ef3-570922944088@linaro.org>
On Fri, Jan 13, 2023 at 03:17:05PM +0100, Konrad Dybcio wrote:
>
>
> On 13.01.2023 05:10, Bjorn Andersson wrote:
> > Booting the CRD needs roughly 64MB CMA, rather than relying on people
> > adding boot parameters etc define a region for this, to remove the
> > allocation errors from e.g. NVME.
> >
> > While fixing the CRD define the same region for the X13s.
> >
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> So, to reiterate, the NVMe needs ~64M of contiguous RAM for
> $reasons and without this patch, it is not guaranteed that
> it can always find such a block which causes issues and
> adding a CMA region resolves that, is that correct?
>
That's correct, $reasons being that NVMe complains about failures to
allocate CMA memory. I'll post a v2 with this in the commit message.
Thanks,
Bjorn
> Konrad
> > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 9 +++++++++
> > .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 9 +++++++++
> > 2 files changed, 18 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > index b29c02307839..e30a37c73b90 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > @@ -128,6 +128,15 @@ vreg_wwan: regulator-wwan {
> >
> > regulator-boot-on;
> > };
> > +
> > + reserved-memory {
> > + linux,cma {
> > + compatible = "shared-dma-pool";
> > + size = <0x0 0x8000000>;
> > + reusable;
> > + linux,cma-default;
> > + };
> > + };
> > };
> >
> > &apps_rsc {
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > index 78e61a8184c5..5bfd1f0b2a24 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > @@ -153,6 +153,15 @@ vreg_wwan: regulator-wwan {
> > regulator-boot-on;
> > };
> >
> > + reserved-memory {
> > + linux,cma {
> > + compatible = "shared-dma-pool";
> > + size = <0x0 0x8000000>;
> > + reusable;
> > + linux,cma-default;
> > + };
> > + };
> > +
> > thermal-zones {
> > skin-temp-thermal {
> > polling-delay-passive = <250>;
next prev parent reply other threads:[~2023-01-17 1:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-13 4:10 [PATCH] arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s Bjorn Andersson
2023-01-13 14:17 ` Konrad Dybcio
2023-01-17 1:57 ` Bjorn Andersson [this message]
2023-01-13 20:16 ` Andrew Halaney
2023-01-15 4:11 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117015713.j62qymja6bdbgxiu@builder.lan \
--to=andersson@kernel.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=johan@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_bjorande@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox