[PATCH 4/5] arm64: dst: qcom: sm8450: switch to usb3/dp combo phy

[Neil Armstrong <neil.armstrong@linaro.org>]

The QMP PHY is a USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 38 +++++++++++++-----------------------
 1 file changed, 14 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d66dcd8fe61f..757b7c56d5f5 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -748,7 +748,7 @@ gcc: clock-controller@100000 {
 				 <&ufs_mem_phy_lanes 0>,
 				 <&ufs_mem_phy_lanes 1>,
 				 <&ufs_mem_phy_lanes 2>,
-				 <0>;
+				 <&usb_1_qmpphy 0>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
 				      "pcie_0_pipe_clk",
@@ -2038,37 +2038,27 @@ usb_1_hsphy: phy@88e3000 {
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sm8450-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x20>;
-			status = "disabled";
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x4000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
 		};
 
 		remoteproc_slpi: remoteproc@2400000 {
@@ -2976,8 +2966,8 @@ dispcc: clock-controller@af00000 {
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <0>, /* dp0 */
-				 <0>,
+				 <&usb_1_qmpphy 0>,
+				 <&usb_1_qmpphy 1>,
 				 <0>, /* dp1 */
 				 <0>,
 				 <0>, /* dp2 */
@@ -4157,7 +4147,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy 0>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};

-- 
2.34.1