[PATCH v10 2/6] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment

[Konrad Dybcio <konrad.dybcio@linaro.org>]

CPR3 and newer can be fed per-OPP voltage adjustment values for both
open- and closed-loop paths to make better decisions about settling
on the final voltage offset target. Document these properties.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../devicetree/bindings/opp/opp-v2-qcom-level.yaml         | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
index a30ef93213c0..93cc88434dfe 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -34,6 +34,20 @@ patternProperties:
         minItems: 1
         maxItems: 2
 
+      qcom,opp-cloop-vadj:
+        description: |
+          A value representing the closed-loop voltage adjustment value
+          associated with this OPP node.
+        $ref: /schemas/types.yaml#/definitions/int32-array
+        maxItems: 2
+
+      qcom,opp-oloop-vadj:
+        description: |
+          A value representing the open-loop voltage adjustment value
+          associated with this OPP node.
+        $ref: /schemas/types.yaml#/definitions/int32-array
+        maxItems: 2
+
     required:
       - opp-level
       - qcom,opp-fuse-level

-- 
2.39.1