From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Jani Nikula <jani.nikula@linux.intel.com>,
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>,
dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org
Subject: [PATCH v2 06/10] drm/display/dsc: split DSC 1.2 and DSC 1.1 (pre-SCR) parameters
Date: Tue, 7 Mar 2023 15:48:57 +0200 [thread overview]
Message-ID: <20230307134901.322560-7-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230307134901.322560-1-dmitry.baryshkov@linaro.org>
The array of rc_parameters contains a mixture of parameters from DSC 1.1
and DSC 1.2 standards. Split these tow configuration arrays in
preparation to adding more configuration data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/display/drm_dsc_helper.c | 127 ++++++++++++++++++----
drivers/gpu/drm/i915/display/intel_vdsc.c | 10 +-
include/drm/display/drm_dsc_helper.h | 7 +-
3 files changed, 119 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/display/drm_dsc_helper.c b/drivers/gpu/drm/display/drm_dsc_helper.c
index acb93d4116e0..35b39f3109c4 100644
--- a/drivers/gpu/drm/display/drm_dsc_helper.c
+++ b/drivers/gpu/drm/display/drm_dsc_helper.c
@@ -324,11 +324,81 @@ struct rc_parameters_data {
#define DSC_BPP(bpp) ((bpp) << 4)
+static const struct rc_parameters_data rc_parameters_pre_scr[] = {
+ {
+ .bpp = DSC_BPP(8), .bpc = 8,
+ { 512, 12, 6144, 3, 12, 11, 11, {
+ { 0, 4, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
+ { 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
+ { 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 }, { 5, 12, -12 },
+ { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
+ }
+ }
+ },
+ {
+ .bpp = DSC_BPP(8), .bpc = 10,
+ { 512, 12, 6144, 7, 16, 15, 15, {
+ /*
+ * DSC model/pre-SCR-cfg has 8 for range_max_qp[0], however
+ * VESA DSC 1.1 Table E-5 sets it to 4.
+ */
+ { 0, 4, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 5, 10, -2 },
+ { 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
+ { 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
+ { 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
+ }
+ }
+ },
+ {
+ .bpp = DSC_BPP(8), .bpc = 12,
+ { 512, 12, 6144, 11, 20, 19, 19, {
+ { 0, 12, 2 }, { 4, 12, 0 }, { 9, 13, 0 }, { 9, 14, -2 },
+ { 11, 15, -4 }, { 11, 15, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
+ { 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
+ { 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
+ { 21, 23, -12 }
+ }
+ }
+ },
+ {
+ .bpp = DSC_BPP(12), .bpc = 8,
+ { 341, 15, 2048, 3, 12, 11, 11, {
+ { 0, 2, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
+ { 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
+ { 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 },
+ { 5, 12, -12 }, { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
+ }
+ }
+ },
+ {
+ .bpp = DSC_BPP(12), .bpc = 10,
+ { 341, 15, 2048, 7, 16, 15, 15, {
+ { 0, 2, 2 }, { 2, 5, 0 }, { 3, 7, 0 }, { 4, 8, -2 },
+ { 6, 9, -4 }, { 7, 10, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
+ { 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
+ { 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
+ }
+ }
+ },
+ {
+ .bpp = DSC_BPP(12), .bpc = 12,
+ { 341, 15, 2048, 11, 20, 19, 19, {
+ { 0, 6, 2 }, { 4, 9, 0 }, { 7, 11, 0 }, { 8, 12, -2 },
+ { 10, 13, -4 }, { 11, 14, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
+ { 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
+ { 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
+ { 21, 23, -12 }
+ }
+ }
+ },
+ { /* sentinel */ }
+};
+
/*
* Selected Rate Control Related Parameter Recommended Values
* from DSC_v1.11 spec & C Model release: DSC_model_20161212
*/
-static const struct rc_parameters_data rc_parameters[] = {
+static const struct rc_parameters_data rc_parameters_1_2_444[] = {
{
.bpp = DSC_BPP(6), .bpc = 8,
{ 768, 15, 6144, 3, 13, 11, 11, {
@@ -388,22 +458,18 @@ static const struct rc_parameters_data rc_parameters[] = {
{ 512, 12, 6144, 3, 12, 11, 11, {
{ 0, 4, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
{ 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
- { 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 }, { 5, 12, -12 },
- { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
+ { 3, 9, -8 }, { 3, 10, -10 }, { 5, 10, -10 }, { 5, 11, -12 },
+ { 5, 11, -12 }, { 9, 12, -12 }, { 12, 13, -12 }
}
}
},
{
.bpp = DSC_BPP(8), .bpc = 10,
{ 512, 12, 6144, 7, 16, 15, 15, {
- /*
- * DSC model/pre-SCR-cfg has 8 for range_max_qp[0], however
- * VESA DSC 1.1 Table E-5 sets it to 4.
- */
- { 0, 4, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 5, 10, -2 },
+ { 0, 8, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 5, 10, -2 },
{ 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
- { 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
- { 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
+ { 7, 13, -8 }, { 7, 14, -10 }, { 9, 14, -10 }, { 9, 15, -12 },
+ { 9, 15, -12 }, { 13, 16, -12 }, { 16, 17, -12 }
}
}
},
@@ -412,9 +478,9 @@ static const struct rc_parameters_data rc_parameters[] = {
{ 512, 12, 6144, 11, 20, 19, 19, {
{ 0, 12, 2 }, { 4, 12, 0 }, { 9, 13, 0 }, { 9, 14, -2 },
{ 11, 15, -4 }, { 11, 15, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
- { 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
- { 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
- { 21, 23, -12 }
+ { 11, 17, -8 }, { 11, 18, -10 }, { 13, 18, -10 },
+ { 13, 19, -12 }, { 13, 19, -12 }, { 17, 20, -12 },
+ { 20, 21, -12 }
}
}
},
@@ -498,8 +564,8 @@ static const struct rc_parameters_data rc_parameters[] = {
{ 341, 15, 2048, 3, 12, 11, 11, {
{ 0, 2, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
{ 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
- { 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 },
- { 5, 12, -12 }, { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
+ { 3, 8, -8 }, { 3, 9, -10 }, { 5, 9, -10 }, { 5, 9, -12 },
+ { 5, 9, -12 }, { 7, 10, -12 }, { 10, 11, -12 }
}
}
},
@@ -508,8 +574,8 @@ static const struct rc_parameters_data rc_parameters[] = {
{ 341, 15, 2048, 7, 16, 15, 15, {
{ 0, 2, 2 }, { 2, 5, 0 }, { 3, 7, 0 }, { 4, 8, -2 },
{ 6, 9, -4 }, { 7, 10, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
- { 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
- { 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
+ { 7, 12, -8 }, { 7, 13, -10 }, { 9, 13, -10 }, { 9, 13, -12 },
+ { 9, 13, -12 }, { 11, 14, -12 }, { 14, 15, -12 }
}
}
},
@@ -518,9 +584,9 @@ static const struct rc_parameters_data rc_parameters[] = {
{ 341, 15, 2048, 11, 20, 19, 19, {
{ 0, 6, 2 }, { 4, 9, 0 }, { 7, 11, 0 }, { 8, 12, -2 },
{ 10, 13, -4 }, { 11, 14, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
- { 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
- { 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
- { 21, 23, -12 }
+ { 11, 16, -8 }, { 11, 17, -10 }, { 13, 17, -10 },
+ { 13, 17, -12 }, { 13, 17, -12 }, { 15, 18, -12 },
+ { 18, 19, -12 }
}
}
},
@@ -602,7 +668,8 @@ static const struct rc_parameters_data rc_parameters[] = {
{ /* sentinel */ }
};
-static const struct rc_parameters *get_rc_params(u16 dsc_bpp,
+static const struct rc_parameters *get_rc_params(const struct rc_parameters_data *rc_parameters,
+ u16 dsc_bpp,
u8 bits_per_component)
{
int i;
@@ -622,11 +689,13 @@ static const struct rc_parameters *get_rc_params(u16 dsc_bpp,
* function.
*
* @vdsc_cfg: DSC Configuration data partially filled by driver
+ * @kind: operating mode and standard to follow
*
* Return: 0 or -error code in case of an error
*/
-int drm_dsc_setup_rc_params(struct drm_dsc_config *vdsc_cfg)
+int drm_dsc_setup_rc_params(struct drm_dsc_config *vdsc_cfg, enum drm_dsc_params_kind kind)
{
+ const struct rc_parameters_data *data;
const struct rc_parameters *rc_params;
int i;
@@ -634,7 +703,19 @@ int drm_dsc_setup_rc_params(struct drm_dsc_config *vdsc_cfg)
!vdsc_cfg->bits_per_component))
return -EINVAL;
- rc_params = get_rc_params(vdsc_cfg->bits_per_pixel,
+ switch (kind) {
+ case DRM_DSC_1_2_444:
+ data = rc_parameters_1_2_444;
+ break;
+ case DRM_DSC_1_1_PRE_SCR:
+ data = rc_parameters_pre_scr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rc_params = get_rc_params(data,
+ vdsc_cfg->bits_per_pixel,
vdsc_cfg->bits_per_component);
if (!rc_params)
return -EINVAL;
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 20a4c2f343fe..a4d1d2ba71bb 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -157,7 +157,15 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
if (DISPLAY_VER(dev_priv) >= 13) {
calculate_rc_params(vdsc_cfg);
} else {
- ret = drm_dsc_setup_rc_params(vdsc_cfg);
+ if ((compressed_bpp == 8 ||
+ compressed_bpp == 12) &&
+ (vdsc_cfg->bits_per_component == 8 ||
+ vdsc_cfg->bits_per_component == 10 ||
+ vdsc_cfg->bits_per_component == 12))
+ ret = drm_dsc_setup_rc_params(vdsc_cfg, DRM_DSC_1_1_PRE_SCR);
+ else
+ ret = drm_dsc_setup_rc_params(vdsc_cfg, DRM_DSC_1_2_444);
+
if (ret)
return ret;
diff --git a/include/drm/display/drm_dsc_helper.h b/include/drm/display/drm_dsc_helper.h
index 1681791f65a5..c634bb2935d3 100644
--- a/include/drm/display/drm_dsc_helper.h
+++ b/include/drm/display/drm_dsc_helper.h
@@ -10,12 +10,17 @@
#include <drm/display/drm_dsc.h>
+enum drm_dsc_params_kind {
+ DRM_DSC_1_2_444,
+ DRM_DSC_1_1_PRE_SCR, /* legacy params from DSC 1.1 */
+};
+
void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size);
void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
const struct drm_dsc_config *dsc_cfg);
void drm_dsc_set_rc_buf_thresh(struct drm_dsc_config *vdsc_cfg);
-int drm_dsc_setup_rc_params(struct drm_dsc_config *vdsc_cfg);
+int drm_dsc_setup_rc_params(struct drm_dsc_config *vdsc_cfg, enum drm_dsc_params_kind kind);
int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
#endif /* _DRM_DSC_HELPER_H_ */
--
2.39.2
next prev parent reply other threads:[~2023-03-07 13:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 13:48 [PATCH v2 00/10] drm/i915: move DSC RC tables to drm_dsc_helper.c Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 01/10] drm/i915/dsc: change DSC param tables to follow the DSC model Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 02/10] drm/i915/dsc: move rc_buf_thresh values to common helper Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 03/10] drm/i915/dsc: move DSC tables to DRM DSC helper Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 04/10] drm/i915/dsc: stop using interim structure for calculated params Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 05/10] drm/display/dsc: use flat array for rc_parameters lookup Dmitry Baryshkov
2023-03-07 13:48 ` Dmitry Baryshkov [this message]
2023-03-08 10:14 ` [PATCH v2 06/10] drm/display/dsc: split DSC 1.2 and DSC 1.1 (pre-SCR) parameters Jani Nikula
2023-03-08 12:59 ` Dmitry Baryshkov
2023-03-08 13:19 ` Jani Nikula
2023-03-08 16:50 ` Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 07/10] drm/display/dsc: include the rest of pre-SCR parameters Dmitry Baryshkov
2023-03-07 13:48 ` [PATCH v2 08/10] drm/display/dsc: add YCbCr 4:2:2 and 4:2:0 RC parameters Dmitry Baryshkov
2023-03-07 13:49 ` [PATCH v2 09/10] drm/display/dsc: add helper to set semi-const parameters Dmitry Baryshkov
2023-03-07 13:49 ` [PATCH v2 10/10] drm/msm/dsi: use new helpers for DSC setup Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307134901.322560-7-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=joonas.lahtinen@linux.intel.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=rodrigo.vivi@intel.com \
--cc=sean@poorly.run \
--cc=tvrtko.ursulin@linux.intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox