[PATCH v3 01/18] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits

Bartosz Golaszewski
2023-03-27T12:53:36Z

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The file has inconsistent padding of the address part of soc node
children's reg properties. Fix it.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index c5b73c591e0f..5aa28a3b12ae 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -440,7 +440,7 @@ soc: soc@0 {

gcc: clock-controller@100000 {
compatible = "qcom,sa8775p-gcc";
- reg = <0x0 0x100000 0x0 0xc7018>;
+ reg = <0x0 0x00100000 0x0 0xc7018>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -464,7 +464,7 @@ gcc: clock-controller@100000 {

ipcc: mailbox@408000 {
compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
- reg = <0x0 0x408000 0x0 0x1000>;
+ reg = <0x0 0x00408000 0x0 0x1000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
@@ -473,7 +473,7 @@ ipcc: mailbox@408000 {

qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
- reg = <0x0 0xac0000 0x0 0x6000>;
+ reg = <0x0 0x00ac0000 0x0 0x6000>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -485,7 +485,7 @@ qupv3_id_1: geniqup@ac0000 {

uart10: serial@a8c000 {
compatible = "qcom,geni-uart";
- reg = <0x0 0xa8c000 0x0 0x4000>;
+ reg = <0x0 0x00a8c000 0x0 0x4000>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
@@ -735,7 +735,7 @@ rpmhpd_opp_turbo_l1: opp-9 {

tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
- reg = <0x0 0x1f40000 0x0 0x20000>;
+ reg = <0x0 0x01f40000 0x0 0x20000>;
#hwlock-cells = <1>;
};

@@ -754,7 +754,7 @@ cpufreq_hw: cpufreq@18591000 {

tlmm: pinctrl@f000000 {
compatible = "qcom,sa8775p-tlmm";
- reg = <0x0 0xf000000 0x0 0x1000000>;
+ reg = <0x0 0x0f000000 0x0 0x1000000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
--
2.37.2