Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Dylan Van Assche <me@dylanvanassche.be>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Dylan Van Assche <me@dylanvanassche.be>
Subject: [PATCH v5 3/5] arm64: dts: qcom: sdm845: add SLPI FastRPC support
Date: Thu,  6 Apr 2023 19:31:46 +0200	[thread overview]
Message-ID: <20230406173148.28309-4-me@dylanvanassche.be> (raw)
In-Reply-To: <20230406173148.28309-1-me@dylanvanassche.be>

Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through
an allocated memory region to load files from the host filesystem
such as sensor configuration files.

Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to
downstream, to allow userspace to communicate with the SLPI via the
FastRPC interface for initializing the sensors on the SLPI.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 338a715d110a..dc4b553cbe2e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
@@ -878,6 +879,14 @@ mdata_mem: mpss-metadata {
 			size = <0 0x4000>;
 			no-map;
 		};
+
+		fastrpc_mem: fastrpc {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
+			alignment = <0x0 0x400000>;
+			size = <0x0 0x1000000>;
+			reusable;
+		};
 	};
 
 	adsp_pas: remoteproc-adsp {
@@ -3358,6 +3367,23 @@ glink-edge {
 				label = "dsps";
 				qcom,remote-pid = <3>;
 				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
+						      QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
+					memory-region = <&fastrpc_mem>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@0 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <0>;
+					};
+				};
 			};
 		};
 
-- 
2.39.2


  parent reply	other threads:[~2023-04-06 17:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-06 17:31 [PATCH v5 0/5] arm64: dts: qcom: sdm845: add SLPI remoteproc Dylan Van Assche
2023-04-06 17:31 ` [PATCH v5 1/5] " Dylan Van Assche
2023-04-06 17:31 ` [PATCH v5 2/5] dt-bindings: firmware: qcom: scm: add SSC_Q6 and ADSP_Q6 VMIDs Dylan Van Assche
2023-04-06 17:31 ` Dylan Van Assche [this message]
2023-04-06 17:31 ` [PATCH v5 4/5] arm64: dts: qcom: sdm845-oneplus: enable SLPI Dylan Van Assche
2023-04-06 17:31 ` [PATCH v5 5/5] arm64: dts: qcom: sdm845-shift-axolotl: " Dylan Van Assche
2023-04-07 18:36 ` [PATCH v5 0/5] arm64: dts: qcom: sdm845: add SLPI remoteproc Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230406173148.28309-4-me@dylanvanassche.be \
    --to=me@dylanvanassche.be \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox