From: "Matti Lehtimäki" <matti.lehtimaki@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
"Matti Lehtimäki" <matti.lehtimaki@gmail.com>,
"Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Amit Kucheria" <amitk@kernel.org>,
"Thara Gopinath" <thara.gopinath@gmail.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
"Zhang Rui" <rui.zhang@intel.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
Date: Sun, 7 May 2023 23:12:21 +0300 [thread overview]
Message-ID: <20230507201225.89694-4-matti.lehtimaki@gmail.com> (raw)
In-Reply-To: <20230507201225.89694-1-matti.lehtimaki@gmail.com>
The MSM8226 TSENS IP has 6 thermal sensors in a TSENS v0.1 block.
The thermal sensors use non-standard slope values.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
drivers/thermal/qcom/tsens-v0_1.c | 27 ++++++++++++++++++++++++++-
drivers/thermal/qcom/tsens.c | 3 +++
drivers/thermal/qcom/tsens.h | 2 +-
3 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index e89c6f39a3ae..ad57ab94546b 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -243,6 +243,18 @@ static int calibrate_8974(struct tsens_priv *priv)
return 0;
}
+static int __init init_8226(struct tsens_priv *priv)
+{
+ priv->sensor[0].slope = 2901;
+ priv->sensor[1].slope = 2846;
+ priv->sensor[2].slope = 3038;
+ priv->sensor[3].slope = 2955;
+ priv->sensor[4].slope = 2901;
+ priv->sensor[5].slope = 2846;
+
+ return init_common(priv);
+}
+
static int __init init_8939(struct tsens_priv *priv) {
priv->sensor[0].slope = 2911;
priv->sensor[1].slope = 2789;
@@ -258,7 +270,7 @@ static int __init init_8939(struct tsens_priv *priv) {
return init_common(priv);
}
-/* v0.1: 8916, 8939, 8974, 9607 */
+/* v0.1: 8226, 8916, 8939, 8974, 9607 */
static struct tsens_features tsens_v0_1_feat = {
.ver_major = VER_0_1,
@@ -313,6 +325,19 @@ static const struct tsens_ops ops_v0_1 = {
.get_temp = get_temp_common,
};
+static const struct tsens_ops ops_8226 = {
+ .init = init_8226,
+ .calibrate = tsens_calibrate_common,
+ .get_temp = get_temp_common,
+};
+
+struct tsens_plat_data data_8226 = {
+ .num_sensors = 6,
+ .ops = &ops_8226,
+ .feat = &tsens_v0_1_feat,
+ .fields = tsens_v0_1_regfields,
+};
+
static const struct tsens_ops ops_8916 = {
.init = init_common,
.calibrate = calibrate_8916,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 8020ead2794e..eb33a8bf0488 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1095,6 +1095,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,mdm9607-tsens",
.data = &data_9607,
+ }, {
+ .compatible = "qcom,msm8226-tsens",
+ .data = &data_8226,
}, {
.compatible = "qcom,msm8916-tsens",
.data = &data_8916,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index dba9cd38f637..433eba370998 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -635,7 +635,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
extern struct tsens_plat_data data_8960;
/* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
+extern struct tsens_plat_data data_8226, data_8916, data_8939, data_8974, data_9607;
/* TSENS v1 targets */
extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
--
2.34.1
next prev parent reply other threads:[~2023-05-07 20:13 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-07 20:12 [PATCH 0/6] Enable MSM8226 TSENS support Matti Lehtimäki
2023-05-07 20:12 ` [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226 Matti Lehtimäki
2023-05-07 20:19 ` Luca Weiss
2023-05-07 21:25 ` Rob Herring
2023-05-08 9:04 ` Konrad Dybcio
2023-05-10 13:57 ` Krzysztof Kozlowski
2023-07-13 10:11 ` Srinivas Kandagatla
2023-05-07 20:12 ` [PATCH 2/6] dt-bindings: thermal: tsens: " Matti Lehtimäki
2023-05-07 20:22 ` Luca Weiss
2023-05-07 21:25 ` Rob Herring
2023-05-10 13:57 ` Krzysztof Kozlowski
2023-06-05 14:39 ` Daniel Lezcano
2023-05-07 20:12 ` Matti Lehtimäki [this message]
2023-05-07 20:26 ` [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support " Luca Weiss
2023-05-07 20:40 ` Dmitry Baryshkov
2023-05-07 21:11 ` Matti Lehtimäki
2023-05-07 22:49 ` Dmitry Baryshkov
2023-06-05 14:39 ` Daniel Lezcano
2023-05-07 20:12 ` [PATCH 4/6] ARM: dts: msm8226: Add qfprom node Matti Lehtimäki
2023-05-07 20:27 ` Luca Weiss
2023-05-07 20:50 ` Dmitry Baryshkov
2023-05-10 13:58 ` Krzysztof Kozlowski
2023-05-10 14:14 ` Dmitry Baryshkov
2023-05-07 20:12 ` [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells Matti Lehtimäki
2023-05-07 20:31 ` Luca Weiss
2023-05-07 20:41 ` Dmitry Baryshkov
2023-05-07 20:12 ` [PATCH 6/6] ARM: dts: msm8226: Add thermal zones node Matti Lehtimäki
2023-05-07 20:48 ` Dmitry Baryshkov
2023-06-13 23:48 ` (subset) [PATCH 0/6] Enable MSM8226 TSENS support Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230507201225.89694-4-matti.lehtimaki@gmail.com \
--to=matti.lehtimaki@gmail.com \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@gmail.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox