From: Devi Priya <quic_devipriy@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>,
<konrad.dybcio@linaro.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <quic_srichara@quicinc.com>, <quic_sjaganat@quicinc.com>,
<quic_kathirav@quicinc.com>, <quic_arajkuma@quicinc.com>,
<quic_anusha@quicinc.com>
Subject: [PATCH V5 0/3] Add regulator support for IPQ9574 SoC
Date: Wed, 17 May 2023 22:55:24 +0530 [thread overview]
Message-ID: <20230517172527.1968-1-quic_devipriy@quicinc.com> (raw)
IPQ9574 SoC uses the PMIC MP5496 and SMPA1 regulator for APSS voltage scaling.
This patch series adds support for the same and also enables the RPM
communication over the RPMSG framework.
DTS patch depends on the below series which applies cleanly on top of [1]
https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
[1] https://lore.kernel.org/linux-arm-msm/20230515150722.12196-1-quic_anusha@quicinc.com/
[V5]:
- Dropped the below patches as they are already part of linux-next/master
[1/5] regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
[2/5] regulator: qcom_smd: Add MP5496 S1 regulator
- Rebased on the below series
https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
[V4]:
https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/
- Detailed change logs are added to the respective patches
[V3]:
https://lore.kernel.org/linux-arm-msm/20230406070032.22243-1-quic_devipriy@quicinc.com/
- Dropped PATCH [1/6] dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
as it is available in linux-next/master
- Dropped PATCH [4/6] regulator: qcom_smd: Add support to define the bootup voltage
and updated the nominal voltage in the Board DT as discussed
- Splitted the board DT changes to a separate patch as suggested
- Detailed change logs are added to the respective patches
[V2]:
https://lore.kernel.org/linux-arm-msm/20230217142030.16012-1-quic_devipriy@quicinc.com/
- Reordered the patches to have the bindings and driver changes
in place before the device tree support
- Dropped the 'soc: qcom: smd-rpm: Add IPQ9574 compatible' since
it is already part of the linux-next/master
- Detailed change log is added to the respective patches
[V1]:
https://lore.kernel.org/linux-arm-msm/20230113150310.29709-1-quic_devipriy@quicinc.com/
Devi Priya (3):
arm64: dts: qcom: ipq9574: Add RPM related nodes
arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
arm64: dts: qcom: ipq9574: Add cpufreq support
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 77 ++++++++++++++++++++-
2 files changed, 95 insertions(+), 1 deletion(-)
--
2.17.1
next reply other threads:[~2023-05-17 17:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 17:25 Devi Priya [this message]
2023-05-17 17:25 ` [PATCH V5 1/3] arm64: dts: qcom: ipq9574: Add RPM related nodes Devi Priya
2023-05-17 17:25 ` [PATCH V5 2/3] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node Devi Priya
2023-05-17 17:25 ` [PATCH V5 3/3] arm64: dts: qcom: ipq9574: Add cpufreq support Devi Priya
2023-05-26 19:38 ` [PATCH V5 0/3] Add regulator support for IPQ9574 SoC Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230517172527.1968-1-quic_devipriy@quicinc.com \
--to=quic_devipriy@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_anusha@quicinc.com \
--cc=quic_arajkuma@quicinc.com \
--cc=quic_kathirav@quicinc.com \
--cc=quic_sjaganat@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox