[PATCH v4 02/10] interconnect: qcom: icc-rpm: Separate out clock rate calulcations

[Konrad Dybcio <konrad.dybcio@linaro.org>]

In preparation for also setting per-node clock rates, separate out the
logic that computes it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 53 +++++++++++++++++++++----------------
 1 file changed, 30 insertions(+), 23 deletions(-)

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 8b02aa8aa96a..8c1bfd65d774 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -291,6 +291,32 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 	return 0;
 }
 
+static u64 qcom_icc_calc_rate(struct qcom_icc_provider *qp, struct qcom_icc_node *qn, int ctx)
+{
+	u64 agg_avg_rate, agg_peak_rate, agg_rate;
+
+	if (qn->channels)
+		agg_avg_rate = div_u64(qn->sum_avg[ctx], qn->channels);
+	else
+		agg_avg_rate = qn->sum_avg[ctx];
+
+	if (qp->ab_coeff) {
+		agg_avg_rate = agg_avg_rate * qp->ab_coeff;
+		agg_avg_rate = div_u64(agg_avg_rate, 100);
+	}
+
+	if (qp->ib_coeff) {
+		agg_peak_rate = qn->max_peak[ctx] * 100;
+		agg_peak_rate = div_u64(qn->max_peak[ctx], qp->ib_coeff);
+	} else {
+		agg_peak_rate = qn->max_peak[ctx];
+	}
+
+	agg_rate = max_t(u64, agg_avg_rate, agg_peak_rate);
+
+	return div_u64(agg_rate, qn->buswidth);
+}
+
 /**
  * qcom_icc_bus_aggregate - calculate bus clock rates by traversing all nodes
  * @provider: generic interconnect provider
@@ -299,10 +325,9 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_rate)
 {
 	struct qcom_icc_provider *qp = to_qcom_provider(provider);
-	u64 agg_avg_rate, agg_peak_rate, agg_rate;
 	struct qcom_icc_node *qn;
 	struct icc_node *node;
-	int i;
+	int ctx;
 
 	/*
 	 * Iterate nodes on the provider, aggregate bandwidth requests for
@@ -310,27 +335,9 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_r
 	 */
 	list_for_each_entry(node, &provider->nodes, node_list) {
 		qn = node->data;
-		for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
-			if (qn->channels)
-				agg_avg_rate = div_u64(qn->sum_avg[i], qn->channels);
-			else
-				agg_avg_rate = qn->sum_avg[i];
-
-			if (qp->ab_coeff) {
-				agg_avg_rate = agg_avg_rate * qp->ab_coeff;
-				agg_avg_rate = div_u64(agg_avg_rate, 100);
-			}
-
-			if (qp->ib_coeff) {
-				agg_peak_rate = qn->max_peak[i] * 100;
-				agg_peak_rate = div_u64(qn->max_peak[i], qp->ib_coeff);
-			} else {
-				agg_peak_rate = qn->max_peak[i];
-			}
-
-			agg_rate = max_t(u64, agg_avg_rate, agg_peak_rate);
-
-			agg_clk_rate[i] = max_t(u64, agg_clk_rate[i], agg_rate);
+		for (ctx = 0; ctx < QCOM_SMD_RPM_STATE_NUM; ctx++) {
+			agg_clk_rate[ctx] = max_t(u64, agg_clk_rate[ctx],
+						  qcom_icc_calc_rate(qp, qn, ctx));
 		}
 	}
 }

-- 
2.42.0