From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Marijn Suijten <marijn.suijten@somainline.org>
Cc: Stephen Boyd <swboyd@chromium.org>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Bjorn Andersson <andersson@kernel.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org,
Jessica Zhang <quic_jesszhan@quicinc.com>
Subject: [PATCH v3 11/13] drm/msm/dpu: use drmm-managed allocation for dpu_encoder_phys
Date: Sun, 30 Jul 2023 04:19:18 +0300 [thread overview]
Message-ID: <20230730011920.354575-12-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230730011920.354575-1-dmitry.baryshkov@linaro.org>
Change struct allocation of encoder's phys backend data to use
drmm_kzalloc(). This removes the need to perform any actions on encoder
destruction.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 9 ++++----
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 8 ++++---
.../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 15 ++++---------
.../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 13 ++++--------
.../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 21 ++++---------------
5 files changed, 22 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f0a2a1dca741..6a7ea73fe6e2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2217,6 +2217,7 @@ static void dpu_encoder_early_unregister(struct drm_encoder *encoder)
}
static int dpu_encoder_virt_add_phys_encs(
+ struct drm_device *dev,
struct msm_display_info *disp_info,
struct dpu_encoder_virt *dpu_enc,
struct dpu_enc_phys_init_params *params)
@@ -2238,7 +2239,7 @@ static int dpu_encoder_virt_add_phys_encs(
if (disp_info->intf_type == INTF_WB) {
- enc = dpu_encoder_phys_wb_init(params);
+ enc = dpu_encoder_phys_wb_init(dev, params);
if (IS_ERR(enc)) {
DPU_ERROR_ENC(dpu_enc, "failed to init wb enc: %ld\n",
@@ -2249,7 +2250,7 @@ static int dpu_encoder_virt_add_phys_encs(
dpu_enc->phys_encs[dpu_enc->num_phys_encs] = enc;
++dpu_enc->num_phys_encs;
} else if (disp_info->is_cmd_mode) {
- enc = dpu_encoder_phys_cmd_init(params);
+ enc = dpu_encoder_phys_cmd_init(dev, params);
if (IS_ERR(enc)) {
DPU_ERROR_ENC(dpu_enc, "failed to init cmd enc: %ld\n",
@@ -2260,7 +2261,7 @@ static int dpu_encoder_virt_add_phys_encs(
dpu_enc->phys_encs[dpu_enc->num_phys_encs] = enc;
++dpu_enc->num_phys_encs;
} else {
- enc = dpu_encoder_phys_vid_init(params);
+ enc = dpu_encoder_phys_vid_init(dev, params);
if (IS_ERR(enc)) {
DPU_ERROR_ENC(dpu_enc, "failed to init vid enc: %ld\n",
@@ -2349,7 +2350,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
break;
}
- ret = dpu_encoder_virt_add_phys_encs(disp_info,
+ ret = dpu_encoder_virt_add_phys_encs(dpu_kms->dev, disp_info,
dpu_enc, &phys_params);
if (ret) {
DPU_ERROR_ENC(dpu_enc, "failed to add phys encs\n");
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index d48558ede488..4fb0d95f3061 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -281,22 +281,24 @@ struct dpu_encoder_wait_info {
* @p: Pointer to init params structure
* Return: Error code or newly allocated encoder
*/
-struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
+struct dpu_encoder_phys *dpu_encoder_phys_vid_init(struct drm_device *dev,
struct dpu_enc_phys_init_params *p);
/**
* dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder
+ * @dev: Corresponding device for devres management
* @p: Pointer to init params structure
* Return: Error code or newly allocated encoder
*/
-struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
+struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(struct drm_device *dev,
struct dpu_enc_phys_init_params *p);
/**
* dpu_encoder_phys_wb_init - initialize writeback encoder
+ * @dev: Corresponding device for devres management
* @init: Pointer to init info structure with initialization params
*/
-struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
+struct dpu_encoder_phys *dpu_encoder_phys_wb_init(struct drm_device *dev,
struct dpu_enc_phys_init_params *p);
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index df88358e7037..4b4bd9c6f6ae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -13,6 +13,8 @@
#include "dpu_trace.h"
#include "disp/msm_disp_snapshot.h"
+#include <drm/drm_managed.h>
+
#define DPU_DEBUG_CMDENC(e, fmt, ...) DPU_DEBUG("enc%d intf%d " fmt, \
(e) && (e)->base.parent ? \
(e)->base.parent->base.id : -1, \
@@ -567,14 +569,6 @@ static void dpu_encoder_phys_cmd_disable(struct dpu_encoder_phys *phys_enc)
phys_enc->enable_state = DPU_ENC_DISABLED;
}
-static void dpu_encoder_phys_cmd_destroy(struct dpu_encoder_phys *phys_enc)
-{
- struct dpu_encoder_phys_cmd *cmd_enc =
- to_dpu_encoder_phys_cmd(phys_enc);
-
- kfree(cmd_enc);
-}
-
static void dpu_encoder_phys_cmd_prepare_for_kickoff(
struct dpu_encoder_phys *phys_enc)
{
@@ -740,7 +734,6 @@ static void dpu_encoder_phys_cmd_init_ops(
ops->atomic_mode_set = dpu_encoder_phys_cmd_atomic_mode_set;
ops->enable = dpu_encoder_phys_cmd_enable;
ops->disable = dpu_encoder_phys_cmd_disable;
- ops->destroy = dpu_encoder_phys_cmd_destroy;
ops->control_vblank_irq = dpu_encoder_phys_cmd_control_vblank_irq;
ops->wait_for_commit_done = dpu_encoder_phys_cmd_wait_for_commit_done;
ops->prepare_for_kickoff = dpu_encoder_phys_cmd_prepare_for_kickoff;
@@ -755,7 +748,7 @@ static void dpu_encoder_phys_cmd_init_ops(
ops->get_line_count = dpu_encoder_phys_cmd_get_line_count;
}
-struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
+struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(struct drm_device *dev,
struct dpu_enc_phys_init_params *p)
{
struct dpu_encoder_phys *phys_enc = NULL;
@@ -763,7 +756,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
DPU_DEBUG("intf\n");
- cmd_enc = kzalloc(sizeof(*cmd_enc), GFP_KERNEL);
+ cmd_enc = drmm_kzalloc(dev, sizeof(*cmd_enc), GFP_KERNEL);
if (!cmd_enc) {
DPU_ERROR("failed to allocate\n");
return ERR_PTR(-ENOMEM);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index c2189e58de6a..b61ca4991d0e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -11,6 +11,8 @@
#include "dpu_trace.h"
#include "disp/msm_disp_snapshot.h"
+#include <drm/drm_managed.h>
+
#define DPU_DEBUG_VIDENC(e, fmt, ...) DPU_DEBUG("enc%d intf%d " fmt, \
(e) && (e)->parent ? \
(e)->parent->base.id : -1, \
@@ -438,12 +440,6 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
phys_enc->enable_state = DPU_ENC_ENABLING;
}
-static void dpu_encoder_phys_vid_destroy(struct dpu_encoder_phys *phys_enc)
-{
- DPU_DEBUG_VIDENC(phys_enc, "\n");
- kfree(phys_enc);
-}
-
static int dpu_encoder_phys_vid_wait_for_vblank(
struct dpu_encoder_phys *phys_enc)
{
@@ -681,7 +677,6 @@ static void dpu_encoder_phys_vid_init_ops(struct dpu_encoder_phys_ops *ops)
ops->atomic_mode_set = dpu_encoder_phys_vid_atomic_mode_set;
ops->enable = dpu_encoder_phys_vid_enable;
ops->disable = dpu_encoder_phys_vid_disable;
- ops->destroy = dpu_encoder_phys_vid_destroy;
ops->control_vblank_irq = dpu_encoder_phys_vid_control_vblank_irq;
ops->wait_for_commit_done = dpu_encoder_phys_vid_wait_for_commit_done;
ops->wait_for_vblank = dpu_encoder_phys_vid_wait_for_vblank;
@@ -694,7 +689,7 @@ static void dpu_encoder_phys_vid_init_ops(struct dpu_encoder_phys_ops *ops)
ops->get_frame_count = dpu_encoder_phys_vid_get_frame_count;
}
-struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
+struct dpu_encoder_phys *dpu_encoder_phys_vid_init(struct drm_device *dev,
struct dpu_enc_phys_init_params *p)
{
struct dpu_encoder_phys *phys_enc = NULL;
@@ -704,7 +699,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
return ERR_PTR(-EINVAL);
}
- phys_enc = kzalloc(sizeof(*phys_enc), GFP_KERNEL);
+ phys_enc = drmm_kzalloc(dev, sizeof(*phys_enc), GFP_KERNEL);
if (!phys_enc) {
DPU_ERROR("failed to create encoder due to memory allocation error\n");
return ERR_PTR(-ENOMEM);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
index a466ff70a4d6..9a44a1575682 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
@@ -8,6 +8,7 @@
#include <linux/debugfs.h>
#include <drm/drm_framebuffer.h>
+#include <drm/drm_managed.h>
#include "dpu_encoder_phys.h"
#include "dpu_formats.h"
@@ -552,20 +553,6 @@ static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys *phys_enc)
phys_enc->enable_state = DPU_ENC_DISABLED;
}
-/**
- * dpu_encoder_phys_wb_destroy - destroy writeback encoder
- * @phys_enc: Pointer to physical encoder
- */
-static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys *phys_enc)
-{
- if (!phys_enc)
- return;
-
- DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
-
- kfree(phys_enc);
-}
-
static void dpu_encoder_phys_wb_prepare_wb_job(struct dpu_encoder_phys *phys_enc,
struct drm_writeback_job *job)
{
@@ -661,7 +648,6 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops)
ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set;
ops->enable = dpu_encoder_phys_wb_enable;
ops->disable = dpu_encoder_phys_wb_disable;
- ops->destroy = dpu_encoder_phys_wb_destroy;
ops->atomic_check = dpu_encoder_phys_wb_atomic_check;
ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done;
ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff;
@@ -677,9 +663,10 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops)
/**
* dpu_encoder_phys_wb_init - initialize writeback encoder
+ * @dev: Corresponding device for devres management
* @p: Pointer to init info structure with initialization params
*/
-struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
+struct dpu_encoder_phys *dpu_encoder_phys_wb_init(struct drm_device *dev,
struct dpu_enc_phys_init_params *p)
{
struct dpu_encoder_phys *phys_enc = NULL;
@@ -692,7 +679,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
return ERR_PTR(-EINVAL);
}
- wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL);
+ wb_enc = drmm_kzalloc(dev, sizeof(*wb_enc), GFP_KERNEL);
if (!wb_enc) {
DPU_ERROR("failed to allocate wb phys_enc enc\n");
return ERR_PTR(-ENOMEM);
--
2.39.2
next prev parent reply other threads:[~2023-07-30 1:19 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-30 1:19 [PATCH v3 00/13] drm/msm/dpu: use managed memory allocations Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 01/13] drm/msm/dpu: cleanup dpu_kms_hw_init error path Dmitry Baryshkov
2023-12-01 19:12 ` [Freedreno] " Jessica Zhang
2023-07-30 1:19 ` [PATCH v3 02/13] drm/msm/dpu: remove IS_ERR_OR_NULL for dpu_hw_intr_init() error handling Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 03/13] drm/msm/dpu: use devres-managed allocation for interrupts data Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 04/13] drm/msm/dpu: use devres-managed allocation for VBIF data Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 05/13] drm/msm/dpu: use devres-managed allocation for MDP TOP Dmitry Baryshkov
2023-08-15 20:17 ` Jessica Zhang
2023-08-16 7:27 ` Dmitry Baryshkov
2023-12-01 18:57 ` Jessica Zhang
2023-07-30 1:19 ` [PATCH v3 06/13] drm/msm/dpu: use devres-managed allocation for HW blocks Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 07/13] drm/msm/dpu: drop unused dpu_plane::lock Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 08/13] drm/msm/dpu: remove QoS teardown on plane destruction Dmitry Baryshkov
2023-12-01 19:49 ` Jessica Zhang
2023-07-30 1:19 ` [PATCH v3 09/13] drm/msm/dpu: use drmm-managed allocation for dpu_plane Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 10/13] drm/msm/dpu: use drmm-managed allocation for dpu_crtc Dmitry Baryshkov
2023-07-30 1:19 ` Dmitry Baryshkov [this message]
2023-07-30 1:19 ` [PATCH v3 12/13] drm/msm/dpu: drop dpu_encoder_phys_ops::destroy Dmitry Baryshkov
2023-07-30 1:19 ` [PATCH v3 13/13] drm/msm/dpu: use drmm-managed allocation for dpu_encoder_virt Dmitry Baryshkov
2023-12-01 19:29 ` Jessica Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230730011920.354575-12-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_jesszhan@quicinc.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox