linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: rfoss@kernel.org, todor.too@gmail.com,
	bryan.odonoghue@linaro.org, agross@kernel.org,
	andersson@kernel.org, konrad.dybcio@linaro.org,
	mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
	sakari.ailus@linux.intel.com, andrey.konovalov@linaro.org
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v0 2/9] media: qcom: camss: Fix V4L2 async notifier error path
Date: Mon, 14 Aug 2023 15:10:00 +0100	[thread overview]
Message-ID: <20230814141007.3721197-3-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20230814141007.3721197-1-bryan.odonoghue@linaro.org>

Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.

Rename the label from err_cleanup to err_v4l2_device_register to capture
what the jump does.

Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 75991d849b571..f4948bdf3f8f9 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1617,21 +1617,21 @@ static int camss_probe(struct platform_device *pdev)
 
 	ret = camss_icc_get(camss);
 	if (ret < 0)
-		goto err_cleanup;
+		return ret;
 
 	ret = camss_configure_pd(camss);
 	if (ret < 0) {
 		dev_err(dev, "Failed to configure power domains: %d\n", ret);
-		goto err_cleanup;
+		return ret;
 	}
 
 	ret = camss_init_subdevices(camss);
 	if (ret < 0)
-		goto err_cleanup;
+		return ret;
 
 	ret = dma_set_mask_and_coherent(dev, 0xffffffff);
 	if (ret)
-		goto err_cleanup;
+		return ret;
 
 	camss->media_dev.dev = camss->dev;
 	strscpy(camss->media_dev.model, "Qualcomm Camera Subsystem",
@@ -1643,7 +1643,7 @@ static int camss_probe(struct platform_device *pdev)
 	ret = v4l2_device_register(camss->dev, &camss->v4l2_dev);
 	if (ret < 0) {
 		dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
-		goto err_cleanup;
+		return ret;
 	}
 
 	v4l2_async_nf_init(&camss->notifier, &camss->v4l2_dev);
@@ -1651,12 +1651,12 @@ static int camss_probe(struct platform_device *pdev)
 	num_subdevs = camss_of_parse_ports(camss);
 	if (num_subdevs < 0) {
 		ret = num_subdevs;
-		goto err_cleanup;
+		goto err_v4l2_device_register;
 	}
 
 	ret = camss_register_entities(camss);
 	if (ret < 0)
-		goto err_cleanup;
+		goto err_v4l2_device_register;
 
 	if (num_subdevs) {
 		camss->notifier.ops = &camss_subdev_notifier_ops;
@@ -1690,7 +1690,7 @@ static int camss_probe(struct platform_device *pdev)
 
 err_register_subdevs:
 	camss_unregister_entities(camss);
-err_cleanup:
+err_v4l2_device_register:
 	v4l2_device_unregister(&camss->v4l2_dev);
 	v4l2_async_nf_cleanup(&camss->notifier);
 
-- 
2.41.0


  parent reply	other threads:[~2023-08-14 14:11 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-14 14:09 [PATCH v0 0/9] media: qcom: camss: Bugfix series Bryan O'Donoghue
2023-08-14 14:09 ` [PATCH v0 1/9] media: qcom: camss: Fix pm_domain_on sequence in probe Bryan O'Donoghue
2023-08-14 14:10 ` Bryan O'Donoghue [this message]
2023-08-14 14:10 ` [PATCH v0 3/9] media: qcom: camss: Fix vfe_get() error jump Bryan O'Donoghue
2023-08-14 14:10 ` [PATCH v0 4/9] media: qcom: camss: Fix VFE-17x vfe_disable_output() Bryan O'Donoghue
2023-08-14 14:10 ` [PATCH v0 5/9] media: qcom: camss: Fix VFE-480 vfe_disable_output() Bryan O'Donoghue
2023-08-14 14:10 ` [PATCH v0 6/9] media: qcom: camss: Fix missing vfe_lite clocks check Bryan O'Donoghue
2023-08-14 14:10 ` [PATCH v0 7/9] media: qcom: camss: Fix invalid clock enable bit disjunction Bryan O'Donoghue
2023-08-21 11:56   ` Konrad Dybcio
2023-08-14 14:10 ` [PATCH v0 8/9] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3 Bryan O'Donoghue
2023-08-21  9:53   ` Hans Verkuil
2023-08-21 10:13     ` Bryan O'Donoghue
2023-08-21 18:51     ` Bryan O'Donoghue
2023-08-21 19:21       ` Bryan O'Donoghue
2023-08-14 14:10 ` [PATCH v0 9/9] media: qcom: camss: Fix csid-gen2 for test pattern generator Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230814141007.3721197-3-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=andrey.konovalov@linaro.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=todor.too@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).