[PATCH v0 0/9] media: qcom: camss: Bugfix series

[PATCH v0 0/9] media: qcom: camss: Bugfix series

[Bryan O'Donoghue]

This series covers a number of Fixes: all of which are for application to
stable as well as -next with the exception of the second patch which is a
fix for a SHA that is still in -next.

Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-08-07-db410c-rb3-camss-dts-v3

This series is part of a larger set of fixes, improvements developed/found
when adding a new SoC.

Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-v6.5-rc4-x13s-camss-patches

First pass on that larger series is to get all of the current Fixes: in the
branch out.

Andrey Konovalov (1):
  media: qcom: camss: Fix csid-gen2 for test pattern generator

Bryan O'Donoghue (8):
  media: qcom: camss: Fix pm_domain_on sequence in probe
  media: qcom: camss: Fix V4L2 async notifier error path
  media: qcom: camss: Fix vfe_get() error jump
  media: qcom: camss: Fix VFE-17x vfe_disable_output()
  media: qcom: camss: Fix VFE-480 vfe_disable_output()
  media: qcom: camss: Fix missing vfe_lite clocks check
  media: qcom: camss: Fix invalid clock enable bit disjunction
  media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater
    than 3

 .../platform/qcom/camss/camss-csid-gen2.c     | 13 +++++-----
 .../qcom/camss/camss-csiphy-3ph-1-0.c         |  2 +-
 .../media/platform/qcom/camss/camss-vfe-170.c | 19 +++-----------
 .../media/platform/qcom/camss/camss-vfe-480.c | 19 +++-----------
 drivers/media/platform/qcom/camss/camss-vfe.c |  5 ++--
 drivers/media/platform/qcom/camss/camss.c     | 26 +++++++++----------
 6 files changed, 29 insertions(+), 55 deletions(-)

-- 
2.41.0

[PATCH v0 1/9] media: qcom: camss: Fix pm_domain_on sequence in probe

[Bryan O'Donoghue]

We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().

Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.

In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.

Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index f11dc59135a5a..75991d849b571 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1619,6 +1619,12 @@ static int camss_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_cleanup;
 
+	ret = camss_configure_pd(camss);
+	if (ret < 0) {
+		dev_err(dev, "Failed to configure power domains: %d\n", ret);
+		goto err_cleanup;
+	}
+
 	ret = camss_init_subdevices(camss);
 	if (ret < 0)
 		goto err_cleanup;
@@ -1678,12 +1684,6 @@ static int camss_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = camss_configure_pd(camss);
-	if (ret < 0) {
-		dev_err(dev, "Failed to configure power domains: %d\n", ret);
-		return ret;
-	}
-
 	pm_runtime_enable(dev);
 
 	return 0;
-- 
2.41.0

[PATCH v0 2/9] media: qcom: camss: Fix V4L2 async notifier error path

[Bryan O'Donoghue]

Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.

Rename the label from err_cleanup to err_v4l2_device_register to capture
what the jump does.

Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 75991d849b571..f4948bdf3f8f9 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1617,21 +1617,21 @@ static int camss_probe(struct platform_device *pdev)
 
 	ret = camss_icc_get(camss);
 	if (ret < 0)
-		goto err_cleanup;
+		return ret;
 
 	ret = camss_configure_pd(camss);
 	if (ret < 0) {
 		dev_err(dev, "Failed to configure power domains: %d\n", ret);
-		goto err_cleanup;
+		return ret;
 	}
 
 	ret = camss_init_subdevices(camss);
 	if (ret < 0)
-		goto err_cleanup;
+		return ret;
 
 	ret = dma_set_mask_and_coherent(dev, 0xffffffff);
 	if (ret)
-		goto err_cleanup;
+		return ret;
 
 	camss->media_dev.dev = camss->dev;
 	strscpy(camss->media_dev.model, "Qualcomm Camera Subsystem",
@@ -1643,7 +1643,7 @@ static int camss_probe(struct platform_device *pdev)
 	ret = v4l2_device_register(camss->dev, &camss->v4l2_dev);
 	if (ret < 0) {
 		dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
-		goto err_cleanup;
+		return ret;
 	}
 
 	v4l2_async_nf_init(&camss->notifier, &camss->v4l2_dev);
@@ -1651,12 +1651,12 @@ static int camss_probe(struct platform_device *pdev)
 	num_subdevs = camss_of_parse_ports(camss);
 	if (num_subdevs < 0) {
 		ret = num_subdevs;
-		goto err_cleanup;
+		goto err_v4l2_device_register;
 	}
 
 	ret = camss_register_entities(camss);
 	if (ret < 0)
-		goto err_cleanup;
+		goto err_v4l2_device_register;
 
 	if (num_subdevs) {
 		camss->notifier.ops = &camss_subdev_notifier_ops;
@@ -1690,7 +1690,7 @@ static int camss_probe(struct platform_device *pdev)
 
 err_register_subdevs:
 	camss_unregister_entities(camss);
-err_cleanup:
+err_v4l2_device_register:
 	v4l2_device_unregister(&camss->v4l2_dev);
 	v4l2_async_nf_cleanup(&camss->notifier);
 
-- 
2.41.0

[PATCH v0 3/9] media: qcom: camss: Fix vfe_get() error jump

[Bryan O'Donoghue]

Right now it is possible to do a vfe_get() with the internal reference
count at 1. If vfe_check_clock_rates() returns non-zero then we will
leave the reference count as-is and

run:
- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()

skip:
- camss_disable_clocks()

Subsequent vfe_put() calls will when the ref-count is non-zero
unconditionally run:

- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()
- camss_disable_clocks()

vfe_get() should not attempt to roll-back on error when the ref-count is
non-zero as the upper layers will still do their own vfe_put() operations.

vfe_put() will drop the reference count and do the necessary power
domain release, the cleanup jumps in vfe_get() should only be run when
the ref-count is zero.

[   50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80
[   50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023
[   50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   50.095802] pc : refcount_warn_saturate+0xf4/0x148
[   50.095804] lr : refcount_warn_saturate+0xf4/0x148
[   50.095805] sp : ffff80000c7cb8b0
[   50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000
[   50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000
[   50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005
[   50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff
[   50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320
[   50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520
[   50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954
[   50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[   50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000
[   50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040
[   50.095835] Call trace:
[   50.095836]  refcount_warn_saturate+0xf4/0x148
[   50.095838]  device_link_put_kref+0x84/0xc8
[   50.095843]  device_link_del+0x38/0x58
[   50.095846]  vfe_pm_domain_off+0x3c/0x50 [qcom_camss]
[   50.095860]  vfe_put+0x114/0x140 [qcom_camss]
[   50.095869]  csid_set_power+0x2c8/0x408 [qcom_camss]
[   50.095878]  pipeline_pm_power_one+0x164/0x170 [videodev]
[   50.095896]  pipeline_pm_power+0xc4/0x110 [videodev]
[   50.095909]  v4l2_pipeline_pm_use+0x5c/0xa0 [videodev]
[   50.095923]  v4l2_pipeline_pm_get+0x1c/0x30 [videodev]
[   50.095937]  video_open+0x7c/0x100 [qcom_camss]
[   50.095945]  v4l2_open+0x84/0x130 [videodev]
[   50.095960]  chrdev_open+0xc8/0x250
[   50.095964]  do_dentry_open+0x1bc/0x498
[   50.095966]  vfs_open+0x34/0x40
[   50.095968]  path_openat+0xb44/0xf20
[   50.095971]  do_filp_open+0xa4/0x160
[   50.095974]  do_sys_openat2+0xc8/0x188
[   50.095975]  __arm64_sys_openat+0x6c/0xb8
[   50.095977]  invoke_syscall+0x50/0x128
[   50.095982]  el0_svc_common.constprop.0+0x4c/0x100
[   50.095985]  do_el0_svc+0x40/0xa8
[   50.095988]  el0_svc+0x2c/0x88
[   50.095991]  el0t_64_sync_handler+0xf4/0x120
[   50.095994]  el0t_64_sync+0x190/0x198
[   50.095996] ---[ end trace 0000000000000000 ]---

Fixes: 779096916dae ("media: camss: vfe: Fix runtime PM imbalance on error")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-vfe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index dabfd613b2f94..938f373bcd1fd 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -611,7 +611,7 @@ int vfe_get(struct vfe_device *vfe)
 	} else {
 		ret = vfe_check_clock_rates(vfe);
 		if (ret < 0)
-			goto error_pm_runtime_get;
+			goto error_pm_domain;
 	}
 	vfe->power_count++;
 
-- 
2.41.0

[PATCH v0 4/9] media: qcom: camss: Fix VFE-17x vfe_disable_output()

[Bryan O'Donoghue]

There are two problems with the current vfe_disable_output() routine.

Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.

Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.

Rewrite the vfe_disable_output() routine to

- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0

remembering to hold the spinlock when we do so followed by

- Reset the VFE

Testing on sc8280xp and sdm845 shows this to be a valid fix.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../media/platform/qcom/camss/camss-vfe-170.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 02494c89da91c..ae9137633c301 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -500,28 +500,15 @@ static int vfe_disable_output(struct vfe_line *line)
 	struct vfe_output *output = &line->output;
 	unsigned long flags;
 	unsigned int i;
-	bool done;
-	int timeout = 0;
-
-	do {
-		spin_lock_irqsave(&vfe->output_lock, flags);
-		done = !output->gen2.active_num;
-		spin_unlock_irqrestore(&vfe->output_lock, flags);
-		usleep_range(10000, 20000);
-
-		if (timeout++ == 100) {
-			dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
-			vfe_reset(vfe);
-			output->gen2.active_num = 0;
-			return 0;
-		}
-	} while (!done);
 
 	spin_lock_irqsave(&vfe->output_lock, flags);
 	for (i = 0; i < output->wm_num; i++)
 		vfe_wm_stop(vfe, output->wm_idx[i]);
+	output->gen2.active_num = 0;
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 
+	vfe_reset(vfe);
+
 	return 0;
 }
 
-- 
2.41.0

[PATCH v0 5/9] media: qcom: camss: Fix VFE-480 vfe_disable_output()

[Bryan O'Donoghue]

vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.

Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.

Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../media/platform/qcom/camss/camss-vfe-480.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
index f70aad2e8c237..a64d660abc538 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -334,28 +334,15 @@ static int vfe_disable_output(struct vfe_line *line)
 	struct vfe_output *output = &line->output;
 	unsigned long flags;
 	unsigned int i;
-	bool done;
-	int timeout = 0;
-
-	do {
-		spin_lock_irqsave(&vfe->output_lock, flags);
-		done = !output->gen2.active_num;
-		spin_unlock_irqrestore(&vfe->output_lock, flags);
-		usleep_range(10000, 20000);
-
-		if (timeout++ == 100) {
-			dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
-			vfe_reset(vfe);
-			output->gen2.active_num = 0;
-			return 0;
-		}
-	} while (!done);
 
 	spin_lock_irqsave(&vfe->output_lock, flags);
 	for (i = 0; i < output->wm_num; i++)
 		vfe_wm_stop(vfe, output->wm_idx[i]);
+	output->gen2.active_num = 0;
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 
+	vfe_reset(vfe);
+
 	return 0;
 }
 
-- 
2.41.0

[PATCH v0 6/9] media: qcom: camss: Fix missing vfe_lite clocks check

[Bryan O'Donoghue]

check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-vfe.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 938f373bcd1fd..b021f81cef123 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -535,7 +535,8 @@ static int vfe_check_clock_rates(struct vfe_device *vfe)
 		struct camss_clock *clock = &vfe->clock[i];
 
 		if (!strcmp(clock->name, "vfe0") ||
-		    !strcmp(clock->name, "vfe1")) {
+		    !strcmp(clock->name, "vfe1") ||
+		    !strcmp(clock->name, "vfe_lite")) {
 			u64 min_rate = 0;
 			unsigned long rate;
 
-- 
2.41.0

[PATCH v0 7/9] media: qcom: camss: Fix invalid clock enable bit disjunction

[Bryan O'Donoghue]

define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)

disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
either way.

Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 04baa80494c66..4dba61b8d3f2a 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -476,7 +476,7 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
 
 	settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate);
 
-	val = is_gen2 ? BIT(7) : CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE;
+	val = CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE;
 	for (i = 0; i < c->num_data; i++)
 		val |= BIT(c->data[i].pos * 2);
 
-- 
2.41.0

Re: [PATCH v0 7/9] media: qcom: camss: Fix invalid clock enable bit disjunction

[Konrad Dybcio]

On 14.08.2023 16:10, Bryan O'Donoghue wrote:
> define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)
> 
> disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
> either way.
> 
> Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
> Cc: stable@vger.kernel.org
"eeeh"

> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

[PATCH v0 8/9] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3

[Bryan O'Donoghue]

VC_MODE = 0 implies a two bit VC address.
VC_MODE = 1 is required for VCs with a larger address than two bits.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-csid-gen2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen2.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
index 45c7986d4a8d0..9ac253111e572 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-gen2.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
@@ -352,7 +352,7 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
 		phy_sel = csid->phy.csiphy_id;
 
 	if (enable) {
-		u8 dt_id = vc;
+		u8 dt_id = vc * 4;
 
 		if (tg->enabled) {
 			/* Config Test Generator */
@@ -449,6 +449,8 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
 	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0);
 
 	val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN;
+	if (vc > 3)
+		val |= 1 << CSI2_RX_CFG1_VC_MODE;
 	val |= 1 << CSI2_RX_CFG1_MISR_EN;
 	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
 
-- 
2.41.0

Re: [PATCH v0 8/9] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3

[Hans Verkuil]

Hi Bryan,

On 14/08/2023 16:10, Bryan O'Donoghue wrote:
> VC_MODE = 0 implies a two bit VC address.
> VC_MODE = 1 is required for VCs with a larger address than two bits.

This explains the second chunk in the patch below, but it doesn't explain
why dt_id is now suddenly vc * 4 instead of vc.

I don't feel comfortable merging this patch since I'm not sure if that
dt_id change was perhaps an error.

If the change IS correct, then please reply and provide a better commit
log.

Regards,

	Hans

> 
> Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
> Cc: stable@vger.kernel.org
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  drivers/media/platform/qcom/camss/camss-csid-gen2.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen2.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
> index 45c7986d4a8d0..9ac253111e572 100644
> --- a/drivers/media/platform/qcom/camss/camss-csid-gen2.c
> +++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
> @@ -352,7 +352,7 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
>  		phy_sel = csid->phy.csiphy_id;
>  
>  	if (enable) {
> -		u8 dt_id = vc;
> +		u8 dt_id = vc * 4;
>  
>  		if (tg->enabled) {
>  			/* Config Test Generator */
> @@ -449,6 +449,8 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
>  	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0);
>  
>  	val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN;
> +	if (vc > 3)
> +		val |= 1 << CSI2_RX_CFG1_VC_MODE;
>  	val |= 1 << CSI2_RX_CFG1_MISR_EN;
>  	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
>  

Re: [PATCH v0 8/9] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3

[Bryan O'Donoghue]

On 21/08/2023 10:53, Hans Verkuil wrote:
> Hi Bryan,
> 
> On 14/08/2023 16:10, Bryan O'Donoghue wrote:
>> VC_MODE = 0 implies a two bit VC address.
>> VC_MODE = 1 is required for VCs with a larger address than two bits.
> 
> This explains the second chunk in the patch below, but it doesn't explain
> why dt_id is now suddenly vc * 4 instead of vc.
> 
> I don't feel comfortable merging this patch since I'm not sure if that
> dt_id change was perhaps an error.
> 
> If the change IS correct, then please reply and provide a better commit
> log.

 From memory that's a copy/paste from the original qcom code.

I'll verify that and repost a better commit log.

---
bod

Re: [PATCH v0 8/9] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3

[Bryan O'Donoghue]

On 21/08/2023 10:53, Hans Verkuil wrote:
> +		u8 dt_id = vc * 4;

You're right.

dt_id = vc is wrong but so is dt_id = vc * 4.

I'll post a fix for the dt_id as a separate patch.

---
bod

Re: [PATCH v0 8/9] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3

[Bryan O'Donoghue]

On 21/08/2023 19:51, Bryan O'Donoghue wrote:
> On 21/08/2023 10:53, Hans Verkuil wrote:
>> +        u8 dt_id = vc * 4;
> 
> You're right.
> 
> dt_id = vc is wrong but so is dt_id = vc * 4.
> 
> I'll post a fix for the dt_id as a separate patch.
> 
> ---
> bod

No wait.. dt_id = vc is _fine_

I'll add a patch to document what this does since the provenance of the 
changes for this value are undocumented and confusing even to me, with 
access to the documentation for it.

---
bod

[PATCH v0 9/9] media: qcom: camss: Fix csid-gen2 for test pattern generator

[Bryan O'Donoghue]

From: Andrey Konovalov <andrey.konovalov@linaro.org>

In the current driver csid Test Pattern Generator (TPG) doesn't work.
This change:
- fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0
- fixes the shift by one between test_pattern control value and the
  actual pattern.
So that TPG starts working, but with the below limitations:
- only test_pattern=9 works as it should
- test_pattern=8 and test_pattern=7 produce black frame (all zeroes)
- the rest of test_pattern's don't work (yavta doesn't get the data)
- regardless of the CFA pattern set by 'media-ctl -V' the actual pixel
  order is always the same (RGGB for any RAW8 or RAW10P format in
  4608x2592 resolution).

Tested with:

RAW10P format, VC0:
 media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0

RAW10P format, VC1:
 media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1

RAW8 format, VC0:
 media-ctl --reset
 media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-csid-gen2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen2.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
index 9ac253111e572..b0890259af4ee 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-gen2.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
@@ -355,9 +355,6 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
 		u8 dt_id = vc * 4;
 
 		if (tg->enabled) {
-			/* Config Test Generator */
-			vc = 0xa;
-
 			/* configure one DT, infinite frames */
 			val = vc << TPG_VC_CFG0_VC_NUM;
 			val |= INTELEAVING_MODE_ONE_SHOT << TPG_VC_CFG0_LINE_INTERLEAVING_MODE;
@@ -370,14 +367,14 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
 
 			writel_relaxed(0x12345678, csid->base + CSID_TPG_LFSR_SEED);
 
-			val = input_format->height & 0x1fff << TPG_DT_n_CFG_0_FRAME_HEIGHT;
-			val |= input_format->width & 0x1fff << TPG_DT_n_CFG_0_FRAME_WIDTH;
+			val = (input_format->height & 0x1fff) << TPG_DT_n_CFG_0_FRAME_HEIGHT;
+			val |= (input_format->width & 0x1fff) << TPG_DT_n_CFG_0_FRAME_WIDTH;
 			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
 
 			val = format->data_type << TPG_DT_n_CFG_1_DATA_TYPE;
 			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
 
-			val = tg->mode << TPG_DT_n_CFG_2_PAYLOAD_MODE;
+			val = (tg->mode - 1) << TPG_DT_n_CFG_2_PAYLOAD_MODE;
 			val |= 0xBE << TPG_DT_n_CFG_2_USER_SPECIFIED_PAYLOAD;
 			val |= format->decode_format << TPG_DT_n_CFG_2_ENCODE_FORMAT;
 			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_2(0));
-- 
2.41.0