From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Marijn Suijten <marijn.suijten@somainline.org>
Cc: Stephen Boyd <swboyd@chromium.org>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Bjorn Andersson <andersson@kernel.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org
Subject: [PATCH 2/2] drm/msm/dsi: free TX buffer in unbind
Date: Thu, 12 Oct 2023 02:39:19 +0300 [thread overview]
Message-ID: <20231011233919.410099-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20231011233919.410099-1-dmitry.baryshkov@linaro.org>
If the drm/msm init code gets an error during output modeset
initialisation, the kernel will report an error regarding DRM memory
manager not being clean during shutdown. This is because
msm_dsi_modeset_init() allocates a piece of GEM memory for the TX
buffer, but destruction of the buffer happens only at
msm_dsi_host_destroy(), which is called during DSI driver's remove()
time, much later than the DRM MM shutdown.
To solve this issue, move the TX buffer destruction to dsi_unbind(), so
that the buffer is destructed at the correct time. Note, we also have to
store a reference to the address space, because priv->kms->aspace is
cleared before components are unbound.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Fixes: 8f59ee9a570c ("drm/msm/dsi: Adjust probe order")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi.c | 1 +
drivers/gpu/drm/msm/dsi/dsi.h | 1 +
drivers/gpu/drm/msm/dsi/dsi_host.c | 13 +++++++++----
3 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
index 47f327e68471..c6bd7bf15605 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -131,6 +131,7 @@ static void dsi_unbind(struct device *dev, struct device *master,
struct msm_drm_private *priv = dev_get_drvdata(master);
struct msm_dsi *msm_dsi = dev_get_drvdata(dev);
+ msm_dsi_tx_buf_free(msm_dsi->host);
priv->dsi[msm_dsi->id] = NULL;
}
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index a01c326774a6..28379b1af63f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -124,6 +124,7 @@ int dsi_tx_buf_alloc_v2(struct msm_dsi_host *msm_host, int size);
void *dsi_tx_buf_get_6g(struct msm_dsi_host *msm_host);
void *dsi_tx_buf_get_v2(struct msm_dsi_host *msm_host);
void dsi_tx_buf_put_6g(struct msm_dsi_host *msm_host);
+void msm_dsi_tx_buf_free(struct mipi_dsi_host *mipi_host);
int dsi_dma_base_get_6g(struct msm_dsi_host *msm_host, uint64_t *iova);
int dsi_dma_base_get_v2(struct msm_dsi_host *msm_host, uint64_t *iova);
int dsi_clk_init_v2(struct msm_dsi_host *msm_host);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 19019c764f11..3357b2a80786 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -147,6 +147,7 @@ struct msm_dsi_host {
/* DSI 6G TX buffer*/
struct drm_gem_object *tx_gem_obj;
+ struct msm_gem_address_space *aspace;
/* DSI v2 TX buffer */
void *tx_buf;
@@ -1134,8 +1135,10 @@ int dsi_tx_buf_alloc_6g(struct msm_dsi_host *msm_host, int size)
uint64_t iova;
u8 *data;
+ msm_host->aspace = msm_gem_address_space_get(priv->kms->aspace);
+
data = msm_gem_kernel_new(dev, size, MSM_BO_WC,
- priv->kms->aspace,
+ msm_host->aspace,
&msm_host->tx_gem_obj, &iova);
if (IS_ERR(data)) {
@@ -1164,8 +1167,9 @@ int dsi_tx_buf_alloc_v2(struct msm_dsi_host *msm_host, int size)
return 0;
}
-static void dsi_tx_buf_free(struct msm_dsi_host *msm_host)
+void msm_dsi_tx_buf_free(struct mipi_dsi_host *host)
{
+ struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
struct drm_device *dev = msm_host->dev;
struct msm_drm_private *priv;
@@ -1180,8 +1184,10 @@ static void dsi_tx_buf_free(struct msm_dsi_host *msm_host)
priv = dev->dev_private;
if (msm_host->tx_gem_obj) {
- msm_gem_kernel_put(msm_host->tx_gem_obj, priv->kms->aspace);
+ msm_gem_kernel_put(msm_host->tx_gem_obj, msm_host->aspace);
+ msm_gem_address_space_put(msm_host->aspace);
msm_host->tx_gem_obj = NULL;
+ msm_host->aspace = NULL;
}
if (msm_host->tx_buf)
@@ -1967,7 +1973,6 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host)
struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
DBG("");
- dsi_tx_buf_free(msm_host);
if (msm_host->workqueue) {
destroy_workqueue(msm_host->workqueue);
msm_host->workqueue = NULL;
--
2.39.2
prev parent reply other threads:[~2023-10-11 23:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-11 23:39 [PATCH 0/2] drm/msm/dsi: fix handling of TX DMA buffer Dmitry Baryshkov
2023-10-11 23:39 ` [PATCH 1/2] drm/msm/dsi: use msm_gem_kernel_put to free TX buffer Dmitry Baryshkov
2023-10-11 23:39 ` Dmitry Baryshkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231011233919.410099-3-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox