[PATCH v2 2/2] soc: qcom: pmic_glink: enable UCSI by default

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Now as the issue with the UCSI_GET_PDOS is worked around, enable UCSI
support for all PMIC_GLINK platforms except Qualcomm SC8180X. The
mentioned SoC has slightly different UCSI implementation, which I would
like be tested properly before enabling it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/soc/qcom/pmic_glink.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
index 914057331afd..71d8901a9389 100644
--- a/drivers/soc/qcom/pmic_glink.c
+++ b/drivers/soc/qcom/pmic_glink.c
@@ -18,9 +18,6 @@ enum {
 	PMIC_GLINK_CLIENT_UCSI,
 };
 
-#define PMIC_GLINK_CLIENT_DEFAULT	(BIT(PMIC_GLINK_CLIENT_BATT) |	\
-					 BIT(PMIC_GLINK_CLIENT_ALTMODE))
-
 struct pmic_glink {
 	struct device *dev;
 	struct pdr_handle *pdr;
@@ -263,10 +260,10 @@ static int pmic_glink_probe(struct platform_device *pdev)
 	mutex_init(&pg->state_lock);
 
 	match_data = (unsigned long *)of_device_get_match_data(&pdev->dev);
-	if (match_data)
-		pg->client_mask = *match_data;
-	else
-		pg->client_mask = PMIC_GLINK_CLIENT_DEFAULT;
+	if (!match_data)
+		return -EINVAL;
+
+	pg->client_mask = *match_data;
 
 	if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI)) {
 		ret = pmic_glink_add_aux_device(pg, &pg->ucsi_aux, "ucsi");
@@ -336,14 +333,16 @@ static void pmic_glink_remove(struct platform_device *pdev)
 	mutex_unlock(&__pmic_glink_lock);
 }
 
+static const unsigned long pmic_glink_sc8180x_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
+							    BIT(PMIC_GLINK_CLIENT_ALTMODE);
+
 static const unsigned long pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
 							   BIT(PMIC_GLINK_CLIENT_ALTMODE) |
 							   BIT(PMIC_GLINK_CLIENT_UCSI);
 
 static const struct of_device_id pmic_glink_of_match[] = {
-	{ .compatible = "qcom,sm8450-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
-	{ .compatible = "qcom,sm8550-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
-	{ .compatible = "qcom,pmic-glink" },
+	{ .compatible = "qcom,sc8180x-pmic-glink", .data = &pmic_glink_sc8180x_client_mask },
+	{ .compatible = "qcom,pmic-glink", .data = &pmic_glink_sm8450_client_mask },
 	{}
 };
 MODULE_DEVICE_TABLE(of, pmic_glink_of_match);
-- 
2.42.0