[PATCH 0/5] drm/msm: Add display support for X1E80100

[Abel Vesa <abel.vesa@linaro.org>]

This patchset adds support for display for X1E80100.
The support for embedded DisplayPort on this platform will not
be enabled using the connetor type from driver match data,
but through some 'is-edp' property via DT. This subsequent work
will be part of a separate patchset.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Abel Vesa (4):
      dt-bindings: display/msm: document MDSS on X1E80100
      dt-bindings: display/msm: Document the DPU for X1E80100
      drm/msm: mdss: Add X1E80100 support
      drm/msm/dpu: Add X1E80100 support

Abhinav Kumar (1):
      drm/msm/dp: Try looking for link-frequencies into the port@0's endpoint first

 .../bindings/display/msm/qcom,sm8650-dpu.yaml      |   5 +-
 .../bindings/display/msm/qcom,x1e80100-mdss.yaml   | 249 ++++++++++++
 .../drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h   | 449 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/dp/dp_parser.c                 |   6 +-
 drivers/gpu/drm/msm/msm_mdss.c                     |  10 +
 8 files changed, 721 insertions(+), 2 deletions(-)
---
base-commit: 6776c8d0924953c6bbd4920d8408f4c1d898af71
change-id: 20231201-x1e80100-display-a46324400baf

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>