[net-next PATCH v4 1/5] net: phy: move at803x PHY driver to dedicated directory

[Christian Marangi <ansuelsmth@gmail.com>]

In preparation for addition of other Qcom PHY and to tidy things up,
move the at803x PHY driver to dedicated directory.

The same order in the Kconfig selection is saved.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/Kconfig             | 7 +------
 drivers/net/phy/Makefile            | 2 +-
 drivers/net/phy/qcom/Kconfig        | 7 +++++++
 drivers/net/phy/qcom/Makefile       | 2 ++
 drivers/net/phy/{ => qcom}/at803x.c | 0
 5 files changed, 11 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/phy/qcom/Kconfig
 create mode 100644 drivers/net/phy/qcom/Makefile
 rename drivers/net/phy/{ => qcom}/at803x.c (100%)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9e2672800f0b..e261e58bf158 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -335,12 +335,7 @@ config NCN26000_PHY
 	  Currently supports the NCN26000 10BASE-T1S Industrial PHY
 	  with MII interface.
 
-config AT803X_PHY
-	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
-	depends on REGULATOR
-	help
-	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
-	  QCA8337(Internal qca8k PHY) model
+source "drivers/net/phy/qcom/Kconfig"
 
 config QSEMI_PHY
 	tristate "Quality Semiconductor PHYs"
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 6097afd44392..197acfa0b412 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
-obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 ifdef CONFIG_AX88796B_RUST_PHY
   obj-$(CONFIG_AX88796B_PHY)	+= ax88796b_rust.o
 else
@@ -91,6 +90,7 @@ endif
 obj-$(CONFIG_NXP_C45_TJA11XX_PHY)	+= nxp-c45-tja.o
 obj-$(CONFIG_NXP_CBTX_PHY)	+= nxp-cbtx.o
 obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
+obj-y				+= qcom/
 obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
 obj-$(CONFIG_RENESAS_PHY)	+= uPD60620.o
diff --git a/drivers/net/phy/qcom/Kconfig b/drivers/net/phy/qcom/Kconfig
new file mode 100644
index 000000000000..2c274fbbe410
--- /dev/null
+++ b/drivers/net/phy/qcom/Kconfig
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config AT803X_PHY
+	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
+	depends on REGULATOR
+	help
+	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
+	  QCA8337(Internal qca8k PHY) model
diff --git a/drivers/net/phy/qcom/Makefile b/drivers/net/phy/qcom/Makefile
new file mode 100644
index 000000000000..6a68da8aaa7b
--- /dev/null
+++ b/drivers/net/phy/qcom/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_AT803X_PHY)	+= at803x.o
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/qcom/at803x.c
similarity index 100%
rename from drivers/net/phy/at803x.c
rename to drivers/net/phy/qcom/at803x.c
-- 
2.43.0