[PATCH 1/2] clk: qcom: drop the SC7180 Modem subsystem clock driver

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.

Drop the driver to remove possible confusion.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/Kconfig      |  10 ---
 drivers/clk/qcom/Makefile     |   1 -
 drivers/clk/qcom/mss-sc7180.c | 140 ------------------------------------------
 3 files changed, 151 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 4580edbd13ea..8ab08e7b5b6c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -635,16 +635,6 @@ config SC_LPASS_CORECC_7280
 	  Say Y if you want to use LPASS clocks and power domains of the LPASS
 	  core clock controller.
 
-config SC_MSS_7180
-	tristate "SC7180 Modem Clock Controller"
-	depends on ARM64 || COMPILE_TEST
-	select SC_GCC_7180
-	help
-	  Support for the Modem Subsystem clock controller on Qualcomm
-	  Technologies, Inc on SC7180 devices.
-	  Say Y if you want to use the Modem branch clocks of the Modem
-	  subsystem clock controller to reset the MSS subsystem.
-
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1da65ca78e24..dec5b6db6860 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -91,7 +91,6 @@ obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o
 obj-$(CONFIG_SC_LPASSCC_8280XP) += lpasscc-sc8280xp.o
 obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o
 obj-$(CONFIG_SC_LPASS_CORECC_7280) += lpasscorecc-sc7280.o lpassaudiocc-sc7280.o
-obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7280) += videocc-sc7280.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c
deleted file mode 100644
index d106bc65470e..000000000000
--- a/drivers/clk/qcom/mss-sc7180.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/pm_clock.h>
-#include <linux/pm_runtime.h>
-#include <linux/regmap.h>
-
-#include <dt-bindings/clock/qcom,mss-sc7180.h>
-
-#include "clk-regmap.h"
-#include "clk-branch.h"
-#include "common.h"
-
-static struct clk_branch mss_axi_nav_clk = {
-	.halt_reg = 0x20bc,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0x20bc,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mss_axi_nav_clk",
-			.parent_data = &(const struct clk_parent_data){
-				.fw_name = "gcc_mss_nav_axi",
-			},
-			.num_parents = 1,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mss_axi_crypto_clk = {
-	.halt_reg = 0x20cc,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0x20cc,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mss_axi_crypto_clk",
-			.parent_data = &(const struct clk_parent_data){
-				.fw_name = "gcc_mss_mfab_axis",
-			},
-			.num_parents = 1,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static const struct regmap_config mss_regmap_config = {
-	.reg_bits	= 32,
-	.reg_stride	= 4,
-	.val_bits	= 32,
-	.fast_io	= true,
-	.max_register	= 0x41aa0cc,
-};
-
-static struct clk_regmap *mss_sc7180_clocks[] = {
-	[MSS_AXI_CRYPTO_CLK] = &mss_axi_crypto_clk.clkr,
-	[MSS_AXI_NAV_CLK] = &mss_axi_nav_clk.clkr,
-};
-
-static const struct qcom_cc_desc mss_sc7180_desc = {
-	.config = &mss_regmap_config,
-	.clks = mss_sc7180_clocks,
-	.num_clks = ARRAY_SIZE(mss_sc7180_clocks),
-};
-
-static int mss_sc7180_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = devm_pm_runtime_enable(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = devm_pm_clk_create(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = pm_clk_add(&pdev->dev, "cfg_ahb");
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to acquire iface clock\n");
-		return ret;
-	}
-
-	ret = pm_runtime_resume_and_get(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = qcom_cc_probe(pdev, &mss_sc7180_desc);
-	if (ret < 0)
-		goto err_put_rpm;
-
-	pm_runtime_put(&pdev->dev);
-
-	return 0;
-
-err_put_rpm:
-	pm_runtime_put_sync(&pdev->dev);
-
-	return ret;
-}
-
-static const struct dev_pm_ops mss_sc7180_pm_ops = {
-	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
-};
-
-static const struct of_device_id mss_sc7180_match_table[] = {
-	{ .compatible = "qcom,sc7180-mss" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, mss_sc7180_match_table);
-
-static struct platform_driver mss_sc7180_driver = {
-	.probe		= mss_sc7180_probe,
-	.driver		= {
-		.name		= "sc7180-mss",
-		.of_match_table = mss_sc7180_match_table,
-		.pm = &mss_sc7180_pm_ops,
-	},
-};
-
-static int __init mss_sc7180_init(void)
-{
-	return platform_driver_register(&mss_sc7180_driver);
-}
-subsys_initcall(mss_sc7180_init);
-
-static void __exit mss_sc7180_exit(void)
-{
-	platform_driver_unregister(&mss_sc7180_driver);
-}
-module_exit(mss_sc7180_exit);
-
-MODULE_DESCRIPTION("QTI MSS SC7180 Driver");
-MODULE_LICENSE("GPL v2");

-- 
2.39.2