From: Krishna chaitanya chundru <quic_krichai@quicinc.com>
To: "Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
johan+linaro@kernel.org, bmasney@redhat.com, djakov@kernel.org
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<vireshk@kernel.org>, <quic_vbadigan@quicinc.com>,
<quic_skananth@quicinc.com>, <quic_nitegupt@quicinc.com>,
<quic_parass@quicinc.com>, <quic_krichai@quicinc.com>,
<krzysztof.kozlowski@linaro.org>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v10 2/6] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
Date: Tue, 9 Apr 2024 15:43:20 +0530 [thread overview]
Message-ID: <20240409-opp_support-v10-2-1956e6be343f@quicinc.com> (raw)
In-Reply-To: <20240409-opp_support-v10-0-1956e6be343f@quicinc.com>
To access PCIe registers of the host controller and endpoint PCIe
BAR space, config space the CPU-PCIe ICC (interconnect) path should
be voted otherwise it may lead to NoC (Network on chip) timeout.
We are surviving because of other driver voting for this path.
As there is less access on this path compared to PCIe to mem path
add minimum vote i.e 1KBps bandwidth always which is sufficient enough
to keep the path active and is recommended by HW team.
In suspend to ram case there can be some DBI access. Except in suspend
to ram case disable CPU-PCIe ICC path after register space access
is done.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 43 ++++++++++++++++++++++++++++++----
1 file changed, 39 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 14772edcf0d3..e53422171c01 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -245,6 +245,7 @@ struct qcom_pcie {
struct phy *phy;
struct gpio_desc *reset;
struct icc_path *icc_mem;
+ struct icc_path *icc_cpu;
const struct qcom_pcie_cfg *cfg;
struct dentry *debugfs;
bool suspended;
@@ -1409,6 +1410,9 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
if (IS_ERR(pcie->icc_mem))
return PTR_ERR(pcie->icc_mem);
+ pcie->icc_cpu = devm_of_icc_get(pci->dev, "cpu-pcie");
+ if (IS_ERR(pcie->icc_cpu))
+ return PTR_ERR(pcie->icc_cpu);
/*
* Some Qualcomm platforms require interconnect bandwidth constraints
* to be set before enabling interconnect clocks.
@@ -1418,7 +1422,20 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
*/
ret = icc_set_bw(pcie->icc_mem, 0, QCOM_PCIE_LINK_SPEED_TO_BW(1));
if (ret) {
- dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
+ dev_err(pci->dev, "Failed to set interconnect bandwidth for PCIe-MEM: %d\n",
+ ret);
+ return ret;
+ }
+
+ /*
+ * Since the CPU-PCIe path is only used for activities like register
+ * access of the host controller and endpoint Config/BAR space access,
+ * HW team has recommended to use a minimal bandwidth of 1KBps just to
+ * keep the path active.
+ */
+ ret = icc_set_bw(pcie->icc_cpu, 0, kBps_to_icc(1));
+ if (ret) {
+ dev_err(pci->dev, "Failed to set interconnect bandwidth for CPU-PCIe: %d\n",
ret);
return ret;
}
@@ -1448,7 +1465,7 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
if (ret) {
- dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
+ dev_err(pci->dev, "Failed to set interconnect bandwidth for PCIe-MEM: %d\n",
ret);
}
}
@@ -1610,7 +1627,7 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
*/
ret = icc_set_bw(pcie->icc_mem, 0, kBps_to_icc(1));
if (ret) {
- dev_err(dev, "Failed to set interconnect bandwidth: %d\n", ret);
+ dev_err(dev, "Failed to set interconnect bandwidth for PCIe-MEM: %d\n", ret);
return ret;
}
@@ -1634,7 +1651,17 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
pcie->suspended = true;
}
- return 0;
+ /*
+ * In suspend to ram case there are DBI access, except in suspend to ram case
+ * remove the vote for CPU-PCIe path now, since at this point onwards,
+ * no register access will be done.
+ */
+ if (pm_suspend_target_state != PM_SUSPEND_MEM) {
+ ret = icc_disable(pcie->icc_cpu);
+ if (ret)
+ dev_err(dev, "Failed to disable Interconnect path of CPU-PCIe: %d\n", ret);
+ }
+ return ret;
}
static int qcom_pcie_resume_noirq(struct device *dev)
@@ -1642,6 +1669,14 @@ static int qcom_pcie_resume_noirq(struct device *dev)
struct qcom_pcie *pcie = dev_get_drvdata(dev);
int ret;
+ if (pm_suspend_target_state != PM_SUSPEND_MEM) {
+ ret = icc_enable(pcie->icc_cpu);
+ if (ret) {
+ dev_err(dev, "Failed to enable Interconnect path of CPU-PCIe: %d\n", ret);
+ return ret;
+ }
+ }
+
if (pcie->suspended) {
ret = qcom_pcie_host_init(&pcie->pci->pp);
if (ret)
--
2.42.0
next prev parent reply other threads:[~2024-04-09 10:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-09 10:13 [PATCH v10 0/6] PCI: qcom: Add support for OPP Krishna chaitanya chundru
2024-04-09 10:13 ` [PATCH v10 1/6] arm64: dts: qcom: sm8450: Add interconnect path to PCIe node Krishna chaitanya chundru
2024-04-09 10:13 ` Krishna chaitanya chundru [this message]
2024-04-22 14:31 ` [PATCH v10 2/6] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path Manivannan Sadhasivam
2024-04-09 10:13 ` [PATCH v10 3/6] dt-bindings: pci: qcom: Add OPP table Krishna chaitanya chundru
2024-04-09 10:13 ` [PATCH v10 4/6] arm64: dts: qcom: sm8450: Add OPP table support to PCIe Krishna chaitanya chundru
2024-04-22 14:44 ` Manivannan Sadhasivam
2024-04-22 16:55 ` Krishna Chaitanya Chundru
2024-04-22 17:08 ` Manivannan Sadhasivam
2024-04-09 10:13 ` [PATCH v10 5/6] PCI: Bring the PCIe speed to MBps logic to new pcie_link_speed_to_mbps() Krishna chaitanya chundru
2024-04-09 15:07 ` Bjorn Helgaas
2024-04-09 10:13 ` [PATCH v10 6/6] PCI: qcom: Add OPP support to scale performance state of power domain Krishna chaitanya chundru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240409-opp_support-v10-2-1956e6be343f@quicinc.com \
--to=quic_krichai@quicinc.com \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=bmasney@redhat.com \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=johan+linaro@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=quic_nitegupt@quicinc.com \
--cc=quic_parass@quicinc.com \
--cc=quic_skananth@quicinc.com \
--cc=quic_vbadigan@quicinc.com \
--cc=robh@kernel.org \
--cc=vireshk@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox